Table of Contents
Advertisement
The Problem Solver
PROBLEM
WATER
TEMPERATURE
IS INCORREm
WATER WON'T
DRAIN
WATER LEA~
WASHER IS NOISY
WASHER PAUSES
IN ~CLE
If you need more help.. call, toll free:
The GE Answer Center@
800.6262000
consumer information service
(continued)
*
Make sure hot and cold faucets are turned on and
regulated correctiy.
Make sure hoses are connected to correct faucets . . .
hot to hot, cold to cold.
Water valve screens may be stopped up. Remove inlet
hoses from water valve. Clean the screens and reinstil hoses.
Make sure drain hose is not kinked,
Top of drain oufiet should be less than 8 R. above floor.
Make sure hose connections are tight at fauce~.
sure washer is level and firm to the Hoor with rubber fbot pads in place and
front jam nuts tight. See your Instigation hstmctions.
A sharp
distinctive sound will be heard at the end of each spin period as the motor
stops and the spin brake inside the transmission "lacks in:'
.
between spin and rinse.
such as between wash and spin or
22
o + $ ?
This
sound is normal.
Advertisement
Table of Contents
