Operation instructions: 1.Inserting batteries: Insert a 9V battery into the battery compartment on the bottom (underside) of the scale. 2. Weighing yourself: a. Step onto the measurement platform. The scale will say “Hello”. Now step off the platform and wait a few moments b.
inaccurate readings or other errors. When the battery runs very low, the warning icon will appear on the display. When this happens, be sure to replace the battery immediately on the underside of the scale. When over-loaded, “FFFF” will be displayed. Use the unit on hard, flat, dry, level and secure surface only.
Page 4
* Install a new battery * Try using the scale on a different surface (non-carpeted). This scale must only be used on a hard surface such as tile, wood linoleum or short carpet * Be sure you're standing very still when on the scale * Low Batteries &...
Need help?
Do you have a question about the 481077 and is the answer not in the manual?
Questions and answers