Panasonic SDR-S26 Operating Instructions Manual page 92

With other products
Problem
The sound does not play
back properly when a
DVD disc that has been
copied using the DVD
burner is played back.
With a PC
Problem
When connected by the
USB cable, this unit is not
detected by the PC.
When the USB cable is
disconnected, an error
message will appear on
the PC.
It takes a long time to
create a DVD.
The DVD player cannot
play back the discs I have
created using VideoCam
Suite.
92
LSQT1522
≥ When the scenes are copied to a DVD disc using the DVD
burner and then played back with any other devices, sound
may not play back properly.
In this case, use the software supplied with this unit to copy
the scenes.
≥ Close the menu screen before connecting the USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 72)
≥ Disconnect the USB cable, turn the unit off then on and
then reconnect the USB cable.
≥ To disconnect the USB cable safely, double-click the
( ) icon in the task tray and follow the instructions on the
screen.
≥ Creating a DVD may take some time even if the size of the
motion picture files are small.
≥ To playback a DVD disc created using VideoCam Suite, the
player must support playback of that DVD disc. (Refer to
the operating instructions of the player.)
Check points
Check points