BMW K 1600 GTL Exclusive Rider's Manual page 74

The SET light comes on.
5
72
If the universal warning light fails
to appear in the display:
Some malfunctions cannot
be indicated if the 'Gener-
al' warning light cannot be dis-
played.
Check that the 'General' warning
z
light comes on, and that it shows
red and yellow.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Dealer.
ABS self-diagnosis
The self-diagnosis routine
is determining whether the
BMW Motorrad Integral ABS is
ready for operation. The self-
diagnosis routine launches
automatically when you switch on
the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while vehicle is parked.
ABS warning light flashes.
Phase 2
Checking wheel sensors while
starting off. The motorcycle
must reach a speed of at least
3,1 mph (5 km/h) before the
ABS self-diagnosis routine can
be completed.
ABS warning light flashes.
ABS self-diagnosis
completed
The ABS warning lamp goes
out.
If an ABS error is indicated fol-
lowing completion of the ABS
self-diagnosis routine:
It remains possible to continue
riding. It should be noted that
neither the ABS function nor
the integral function is avail-
able.
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
DTC self-diagnosis
The readiness for operation
of the BMW Motorrad DTC is
checked by the self-diagnosis.
The self-diagnosis routine runs
automatically when you switch on
the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
DTC warning light flashes
slowly.