Thank you for choosing a smartphone created by Lumigon in Denmark. With our T2 HD in your hand, you are now about to enter a world full of extraordinary opportunities, first-class entertainment and loads of ingenious features all wrapped in a handy and sleek Danish design.
Lumigon reserves the right to revise the content of this user manual at any time without prior notice. To the maximum extent permitted by applicable law, Lumigon shall not be liable to you, any user, or third party for any direct, indirect, special,...
Page 4
A Quick start guide, SIM card guide, Safety guide, Warranty statement and End-user license agreement are enclosed in the sales box with your product and are also available in the Support section of our website at www.lumigon.com/support. LUMIGON T2 HD – USER MANUAL...
If something is missing in the box, please contact the shop where you bought your phone. NOTE: The items supplied with your phone may vary depending on the country or region where you buy your Lumigon smartphone or depending on your mobile service provider. To buy additional Lumigon accessories, visit our homepage www.lumigon.com or contact your local Lumigon-authorized retailer.
• The original USB cable and power adapter that came with your phone IMPORTANT: To avoid damaging your phone, always use original USB cables and chargers and compatible SIM cards with your phone. T2 HD is only compatible with a nano SIM card.
STEP 5 Turn on the phone: Press and hold down the Power key for 1-2 seconds until the Lumigon logo appears on the screen, and then release the key. If the phone does not turn on, charge it (see Step 4) and try again.
Page 32
KEY / PORT WHAT YOU CAN DO WITH IT • Turn your phone ON: Press & hold the key for 1-2 seconds until the Lumigon logo appears on the screen. • Turn your phone OFF: Press & hold the key until a menu appears on the screen > Touch “Power off”...
9.2 ENABLE SUNLIGHT TOGGLE 1 On a Home screen, touch the Menu key (=). 2 Touch “System settings”. 3 In the “Device” section, touch “T2 HD settings”. 4 Touch “Home screen“. 5 In the “Appearance“ section , find and tick off “Sunlight toggle“. 9.3 SWITCH TO AND FROM SUNLIGHT MODE Once you’ve enabled the Sunlight toggle in the settings, you use the All Apps icon...
You can change how many and what shortcuts (or toggles) are displayed in the Notifications panel. 1 On a Home screen, touch the Menu key (=). 2 Touch “System settings”. 3 In the “Device” section, touch “T2 HD settings”. 4 Touch “Notifications panel”. 5 Select the toggles you want to be displayed by touching them.
You can hide the Search bar from your Home screens or change what it looks like if you want. 1 On a Home screen, touch the Menu key (=). 2 Touch “System settings”. 3 In the “Device” section, touch “T2 HD settings”. 4 Touch “Home screen“. 5 Under “Appearance“, touch “Search bar settings”.
ABOUT QUICKTOUCH QuickTouch is a special Lumigon feature that gives you shortcuts to up to five features or apps that you configure yourself. What makes QuickTouch smart is that you can quickly access your QuickTouch shortcuts no matter what you are doing on your phone - even if you are using another app.
ABOUT ACTIONKEY ActionKey is a physical key right above the touchscreen and is one of the unique Lumigon features. You can program the ActionKey to perform specific actions in specific situations, e.g. turning the flashlight on and off, launching a specific app, silencing an incoming call, turning the speaker on during a call, etc.
ABOUT HANDWAVE Handwave is a special Lumigon feature on your phone that allows you to operate some functions of your phone without actually touching it. For example, you can use Handwave to scroll through your Home screens or your pictures in the Gallery app, accept or silence an incoming call, or snooze your alarm clock in the morning by moving your hand across the screen without touching it.
GLOVE MODE 23.1 ABOUT GLOVE MODE Glove mode is a special feature on your Lumigon phone that allows you to use the touchscreen with your gloves on - a handy feature especially in the wintertime. 23.2 TURNING GLOVE MODE ON AND OFF To switch to and from Glove mode, do any of the following: 1 Open the Status bar by dragging it down with your finger.
ABOUT NOTIFICATION LIGHT Your Lumigon smartphone is equipped with an LED light both on the front and back of the phone that can be used as a notification light. This way whenever you receive a new e-mail or a text message or have a missed call, the phone’s LED light will blink. You can enable and disable the notification light whenever you want.
ABOUT THE REMOTE CONTROL FEATURE Your Lumigon smartphone is equipped with an infrared (IR) receiver that allows it to record IR commands from your existing IR remote controls and an IR transmitter that transmits these to your electronic equipment. This way you can turn your phone into a universal remote control that can operate your TV, audio and video equipment, Mac computer, etc.
Behavior Control is a special Lumigon feature that allows you to configure different behavior profiles for your phone dependent on time and place. You can use the feature on your Lumigon phone by itself or together with a Lumigon dock. For example, you can configure a certain profile to start and end at a specific time of day or, alternatively, “pair”...
USING BEHAVIOR CONTROL WITH A LUMIGON DOCK If you “pair” a specific Behavior Control profile with a Lumigon dock, the profile will be activated whenever you place the phone in this dock and disabled when you remove the phone from the dock.
The eight possible switch settings for the Lumigon dock are displayed below (the black squares indicate the position of the individual switches): Setting 1 Setting 2 Setting 3 Setting 4 Setting 5 Setting 6 Setting 7 Setting 8 To change the dock switch setting: Push the individual switches from one side to another.
ABOUT UPDATING Your Lumigon phone has a built-in updater feature that allows you to easily check for the newest firmware updates that are distributed over the air. These firmware updates may contain various fixes and new features for your phone. Whenever a new update is available, you will receive a notification in the Status bar.
Your Lumigon smartphone is equipped with two cameras - one on the front of the phone and one on the back. The front camera is perfect for taking pictures and recording videos of yourself. Both cameras are equipped with a flash, which allows for sharp and well-lit photos even in low-light conditions.
33.1 ABOUT THE PLAY MUSIC APP Your Lumigon smartphone comes with a built-in Google Play Music app that makes it easy to discover, play, store and share the music you love. If you sign in with your Google Account, any music you have uploaded or purchased on Google Play using this account will be automatically added to your library.
CONNECT TO A WINDOWS COMPUTER You can use the supplied USB cable to connect your Lumigon smartphone to a Windows computer and transfer music, pictures, and other files in both directions. This connection uses the MTP protocol, which is supported by most recent versions of Windows, so you don’t need any extra software to connect your phone to your Windows computer.
Need help?
Do you have a question about the T2 HD and is the answer not in the manual?
Questions and answers