Summary of Contents for MCM an InOne company 50-7330A
-
Page 1: Installation Manual
In-Wall Speaker Installation Manual Model #50-7330A MCM an InOne company 650 Congress Park Drive Centerville, Ohio 45459 www.mcminone.com © 2003 MCM an InOne company... - Page 2 Introduction This series of MCM Custom Audio In-Wall common in ceiling/floor cavities, walls and Speakers is the culmination of: attics. Its port design, shape, size, internal damping material and volume were all • carefully calculated to provide optimum low Years experience frequency performance with the 6½"...
- Page 3 Careful consideration should be made when determining the desired location of the speaker pair. As this Model #50-7330A is referred to as an in-wall speaker, this is the intended mounting location. However, there is no electronic or physical reason these cannot be mounted in ceilings or other locations.
- Page 4 Part 1 New Construction Installation 1. This initial step should be completed after all structure framing is completed, and prior to drywall installation. In this instance, a Pre-Construction Bracket Kit, such as MCM #50- 6681A (sold separately) must be utilized. These brackets mount to wall studs, and in conjunction with drywall, provide a solid mounting base for the speaker.
- Page 5 This warranty is limited to manufacturer defects, in either materials or workmanship. MCM an InOne company, or any other worldwide divisions of Premier Farnell PLC, are not responsible for any consequential or inconsequential damage to any other component, structure or the cost of installation or removal of said items.
Need help?
Do you have a question about the 50-7330A and is the answer not in the manual?
Questions and answers