Advertisement
Advertisement
Table of Contents
Summary of Contents for NTI ENVIROMUX-IPCAM-NPOE
- Page 1 Megapixel PoE Day/Night PTZ Internet Camera Quick Installation Guide (1)
-
Page 2: Package Contents
1. Before You Start Package Contents ENVIROMUX-IPCAM-NPOE CD-ROM (Utility and User's Guide) Multi-Language Quick Installation Guide Network cable (1.5 m / ft.) Mounting kit Power adapter (12V DC, 1.25A) Minimum Requirements A computer with an Ethernet port and web browser ... - Page 3 2. Hardware Installation and Configuration 1. Do not install or mount the IP camera until 5. Once the management interface has opened after you complete the installation steps in your web browser, save the link of the IP below. Temporarily place the IP camera next address to your desktop for ease of access.
- Page 4 Using the ENVIROMUX-IPCAM-NPOE with a PoE switch Internet 1. Connect the provided network cable from the Power over Ethernet switch to the network port on the IP Camera. 2. Connect the switch to your network.
- Page 5 Using the ENVIROMUX-IPCAM-NPOE with an Injector Non-PoE Non-PoE 1. Connect the power adapter to the Injector and then to a power outlet 2. Connect a network cable from the Camera to the Injector's PWR+DATA OUT port 3. Connect a network cable from a switch or router to the Injector's DATA IN port.
Need help?
Do you have a question about the ENVIROMUX-IPCAM-NPOE and is the answer not in the manual?
Questions and answers