Recommendations And Suggestions - Beko CFB 6462 XG User Manual

2

Recommendations and Suggestions

The Instructions for Use apply to
several versions of this appliance.
Accordingly, you
descriptions of individual features
that do not apply to your specific
appliance.
The manufacturer will not be held
•
liable for any damages resulting
from incorrect or improper
installation.
The minimum safety distance
•
between the cooker top and the
extractor hood is 650 mm.
Check that the mains voltage
•
corresponds to that indicated on
the rating plate fixed to the inside
of the hood.
For Class I appliances, check
•
that the domestic power supply
guarantees adequate earthing.
Connect the extractor to the
•
exhaust flue through a pipe of
minimum diameter 120 mm.
The route of the flue must be as
•
short as possible.
Do not connect the extractor
•
hood to exhaust ducts carrying
combustion fumes (boilers,
fireplaces, etc.).
Hood / User Manual
•
may find
•
•
•
•
•
If the extractor is used in
conjunction with non-electrical
appliances (e.g. gas burning
appliances), a sufficient degree
of aeration must be guaranteed in
the room in order to prevent the
backflow of exhaust gas.
The kitchen must have an opening
communicating directly with the
open air in order to guarantee the
entry of clean air.
When the cooker hood is used
in conjunction with appliances
supplied with energy other than
electric, the negative pressure in
the room must not exceed 0,04
mbar to prevent fumes being
drawn back into the room by the
cooker hood.
In the event of damage to the
power cable, it must be replaced
by the manufacturer or by the
technical service department, in
order to prevent any risks.
All air ducting regulations must be
complied with. The extractor hood
has been designed exclusively for
domestic use to eliminate kitchen
smells.
Never use the hood for purposes
other than for which it has been
designed.
13 / 23 EN