Switching Between Wideband And Narrowband Audio; Setting The Range; Ending Subscription; Listening To Other Pc Audio - Plantronics SAVI 430 User Manual

Switching between wideband and
narrowband audio
The Savi W430 is delivered with wideband audio as the default.
You can toggle between narrowband and wideband audio by
doing a short press (less than one second) followed by a long
press (more than three seconds) on the USB adapter subscription
button while it is in an idle state. The USB adapter light will flash
red for four seconds upon entering narrowband mode and flash
green for four seconds upon entering wideband mode.

Setting the range

The Savi W430 is supplied with high range set as the default.
You can change the range setting by holding in the subscription
button of the USB adapter for three seconds while it is in an idle
state. The USB adapter light will flash green for high range, yellow
for medium range and red for low range.

Ending subscription

If the USB adapter is in subscription mode and you want to stop
the adapter from searching for a headset, press the subscription
button again. The subscription light will turn solid red for four
seconds and then go to its previous state.

Listening to other PC audio

Ensure the PC audio that you are trying to listen to is being routed
to your Savi 400 device.
1 Go to "Windows" and open "Sound".
2 Select your Savi 400 devices under "Sound Playback".
Launch the application that contains the PC
3
audio and hit play.

Placing the headset in sleep mode

If you won't be using the headset for a long period of time and
the headset will not be in the charging cradle, you can put the
headset in sleep mode. With the headset idle, press the call
control button for three seconds until you see the headset flash
white twice. To wake the headset, press the call control button
again and you will see two white flashes.
Plantronics Savi User Guide 11