Photo Setup - Telefunken TF-DVR22HD Instruction Manual

• Auto Power Off: Off/3m/5m/10m: select
the time period after which the unit will
automatically switch off or disable this function.
• Beep Sound: enable or disable beeping
sounds when pressing buttons on the unit.
• Delay Off: Off/30s/1m/3m: select the time
period after switching the car ignition off when
the unit will continue recording or disable this
function.
• Language: select the system language.
• TV Mode: NTSC/PAL.
• Frequency: 50 Hz/60 Hz.
• Screen Protection: Off/3m/5m/10m:
Select the time period after which the unit will
automatically switch off the screen backlight.
• IR LED: Off/On: turn the infrared lights on
or off during recording in dark envinronments.
• Format: select this option to format the
inserted SD card. WARNING: all data on the
card will be deleted.
• Default Setting: select OK to reset all
settings to default values.
• Version: check the current firmware
version info.
Video setup
• Resolution: select video resolution:
1080FHD1920x1080/720P1280x720/
WVGA848x480/VGA 640x480.
• Loop Recording: Off/1 minute/3 minute/5
minute/10 minutes. Select the maximum record
cycle time.
• WDR: Off/On. Activate or deactivate the
Wide Dynamic Range (WDR) feature.
• Exposure: adjust the image exposure.
• Motion Detection: Off/On. Activate or
deactivate the motion detection function.
• Record Audio: Off/On. Activate or
deactivate recording of sound for video
recording.
• GSENSOR: Off/High/Medium/Low. Adjust
the G-sensor sensitivity or turn this feature off.
• Date Stamp: Off/On. Enable or disable
the display of the current date on the recorded
video.
• Monitor Parking: Off/On. This feature
Instruction manual
enables the camera to start recording in off
mode after collision, e.g. when your car is
parked and someone hits it.
• Parking Sensitivity: High/Medium/Low.
Adjust the sensitivity of the Monitor Parking
feature.

Photo setup

• Capture Mode: Single/2S Timer/5S
Timer/10S Timer. Select the delay period after
which the photo will be taken automatically.
• Resolution:
16M/12М/10M/8М/5М/3М/2МHD/VGA/1.3М.
Select the size and resolution of the image.
• Sequence: Off/On. Activate or deactivate
sequential image capture.
• Quality: Fine/Normal/Economy. Select the
image quality.
• Sharpness: Soft/Normal/Strong. Select the
image sharpness mode.
• White Balance: select the white balance
mode: Auto/Daylight/Cloudy/Tungsten/
Fluorescent.
• Color: Color/Black & White/Sepia. Select
the color mode
• ISO: Auto/100/200/400. Adjust ISO
sensitivity.
• Exposure: adjust the image exposure.
• Anti-Shaking: Off/On. Enable or disable
the anti-shaking feature.
• HDR: Off/On. Enable or disable the High
Dynamic Range feature..
• Date Stamp: Off/Date/Date Time. Activate
or deactivate showing of date on the photo.
Playback mode setup
• Delete: Delete Current/Delete All. Select
"OK" to delete or "Cancel" to cancel.
• Protect: Lock Current/Unlock Current/Lock
All/Unlock All. Enable or disable the protection
of files from manual deleting or overwriting.
• Slide Show: 2 seconds/5 seconds/8
seconds. Select the period of showing the
photo on the display during slide show.
5
5