Contentsof Hardware Pack - Craftsman 247.203691 Operator's Manual

Contents of Crate
OneRiding Mower
One Steering Wheel/Shaft Assembly
OneRear H itchPlate
OneRiding MowerOperator's Manual
Contentsof Hardware Pack
Beforebeginning installation,remove allthe contentsfromthe crateandall the
hardware from the pack from to makesureeverythingispresent.Hardware i s listed
below.Partnumbers areshowninparentheses.
HitchPlate
Seat M ounting Bracket (withtwo shoulder bolts&locknutsinstalled)
Recommended Tools for Assembly
One Seat A ssembly
OneRear E ngine Cover
One OilDrainSleeve
One Steering Pedestal Cap
4.
OneDischarge C huteAssembly
OneHardware P ack
Lower the steeringwheelassembly ontothe lowersteeringshaft(1)and
secure with bolt andlocknut (2) previously removed. S eeFigure 2.
3/8" Wrench (orsocket) 9/16"Socket
1/2" Wrench (orsocket) 7/16"wrench
5/8" Wrench (orsocket) PhillipsScrewDriver
1/4" Drive Ratchet
Installing The SteeringWheelAssembly
If thesteeringwheelassembly foryourtractordid notcomealready installed,
followthe stepsbelow:
1. Slide the pedestal c apontothe steeringshaftsothatwhenthe steering
shaftis installedonthe tractor,the pedestal c apwill beuprightasshownin
Figure 1.
Figure 1
Remove t he shoulder bolt andlocknut from the steeringshafton thetractor
andretainfor latersteps.
Withthe steeringwheelassembly uprightandpositioned overthe lower
steeringshafton the tractor,alignthe steeringwheelsothatwith the
tractorwheelsstraight,the largeopeningon thesteeringwheelisfacing
forward.
Figure2
Tightentheshoulder bolt andlocknut usinga9/16"wrench and
7/16"wrench o r socket.
Remove t he pedestal c apmountscrew factoryinstalledandlocated onthe
tractor'ssteeringconsole. R etain the screw for laterinstructions.
Slide the Pedestal capdown ontothe tractor(1)andslightlyrotateto the
rightto clipinto place.Secure the pedestal w ith the screw(2)previously
removed. SeeFigure 3.
9 Figure3