Major's Mobisist Liberty 116 Owner's Manual page 16

5 . O P E R AT I O N
■ ■ ■ ■ CIRCUIT BREAKER
The circuit breaker is a reset button located on the battery box with 2 connectors. The circuit breaker
monitors the electric current drawn from the batteries. It is safety feature built in your power chair for you
extra safety. When the batteries and the motors are heavily strained, the circuit breaker will trip to prevent
damage to the motors and the electronics. If the circuit breaker trips, wants for approximately one minute
and then press the button to reset it. Then turn on the controller power, and continue normal operation. If
the circuit breaker continues to trip repeatedly, contact your authorized dealer.
Reset Button
■ ■ ■ ■ REPLACEMENT THE BATTERY
1. Unplug the battery connector that joins the battery boxes together.
2. Lift the battery boxes using the battery strap.
3. Unlock the battery strap and remove the battery box cover.
4. Remove the battery post caps.
5. Unscrew positive terminals (+) one at a time.
6. Unscrew negative terminals (-) one at a time.
7. Remove batteries one at a time.
8. Put the new batteries into the battery boxes.
9. Connect the red line to the positive terminal (+) of a battery while connecting the black line to the
negative terminal (-) of the same battery.
10. Close the box properly and carry it with the strap.
11. Apply the same connecting method to both batteries.
12. Put the battery boxes underneath the seat.
13. Connect the two battery connectors.
16