Table of Contents
Advertisement
MX-1616-PP-POH
Fixed Pro Plus chassis featuring PoH
HDBaseT out, mirrored HDMI out,
HDMI in, IR input transmission card
WyreStorm Pro Plus PoH HDBaseT Solutions
Please read these instructions carefully before installing to avoid complications later.
US/CAN/MEX: +1-518-289-1294
MX-1616-PP-POH-CUSTOM
Modular Pro Plus chassis with selection of customisable
analogue and digital PoH transmission cards.
Thank you for choosing this WyreStorm product.
Toll Free Technical Support: +1-844-280-WYRE (9973)
Instruction Manual
1
Advertisement
Table of Contents
Related Manuals for Wyrestorm MX-1616-PP-POH
Summary of Contents for Wyrestorm MX-1616-PP-POH
- Page 1 HDMI in, IR input transmission card WyreStorm Pro Plus PoH HDBaseT Solutions Instruction Manual Thank you for choosing this WyreStorm product. Please read these instructions carefully before installing to avoid complications later. US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
-
Page 2: Table Of Contents
Basic Remote Control via RS-232 for individual control of sources from display zones Advanced Operation using a WyreStorm Enado or third party control system – all of which adds up to a powerful package for applications of any Routable RS-232 with MX-PP-POH size or budget. -
Page 3: Features
2. Do not place this unit in a confined space such as • HDMI v.1.3 openings with material, newspaper, cardboard or control of sources at all display zones via WyreStorm • Supports 24Bit Colour depth enclosed shelving, cabinets or bookshelves. -
Page 4: Package Contents
• Flash USB stick containing PC control software and digital copy • 6 / 8 x IR TX Emitters (small sensor for Input source) • 1 x MX-1616-PP-POH main unit - 16 input 16 output • 1 x Printed instruction manual... -
Page 5: Panel Descriptions
LED input/output select screen Output select buttons (left/right) IR receive window Confirm selection button Input select buttons (UP/DOWN) Rack handles ii. Rear Panel Description - MX-1616-PP-POH RS485 port HDBaseT PoH output ports EDID DIP Switch (RJ45 Cat5e/6) LAN port EDID DIP default diagram... -
Page 6: Rear Panel Description -Mx-1616-Pp-Poh-Custom
Rear Panel Description - MX-1616-PP-POH-CUSTOM Card Options HDMI in, IR in - “Default” card HDBaseT out, Mirrored HDMI out, TX-POH-010 as standard on all non-CUSTOM MX-PP-POH matrix models. Offers 70m/230ft HDBaseT transmission including Video, Audio, Control & Power, combined with a duplicate HDMI output to allow simultaneous connection of a second local “mirrored”... - Page 7 Control of source device cannot be routed internally through the matrix - an IR loop port is included on the card for corresponding IR TX port connection using the CAB-IR-LINK WyreStorm IR Link cable (CAB-IR- LINK). Similarly, for RS-232 control a phoenix port breaks-out or injects serial commands to be sent down the HDBaseT link.
-
Page 8: Typical Application
2 Satellite/Cable box 2 cat 5e/6 Line Level Audio 70m/230ft VGA/dvi ir tx hdmi ir rx HDBaseT™ and the HDBaseT Alliance logo are rs232 sub pre-out trademarks of the HDBaseT Alliance Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... -
Page 9: All Cards
ii. All Cards PERSONAL AUDIO DEVICE 25w d-class amp 25w d-class amp 25w d-class amp Enhanced 2.1 Audio & HD Enhanced 2.1 Audio & HD Enhanced 2.1 Audio & HD PERSONAL AUDIO DEVICE PERSONAL AUDIO DEVICE 25w d-class amp 25w d-class amp 25w d-class amp Enhanced 2.1 Audio &... -
Page 10: Connection
Plug the 3.5mm jack of the IR receiver into the IR RX i. Connect an WyreStorm IR link cable between the IR RX port of the display receiver. Place the IR receiver sensor port on the matrix output cards to a control system. -
Page 11: Basic Operation
The corresponding OUTPUT channel number will blink on the display when reached. Finally, switch on the matrix at the rear and your WyreStorm system should now be fully connected and Press the LEFT ARROW or RIGHT ARROW key to ready for use. -
Page 12: Basic Remote Control
3 of the matrix, the output zone is OUTPUT OUTPUT ort: support@wyrestorm.com US: +866 677 0053 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343 EU: +44 (0) 1793 230 343 System Code Switch... - Page 13 IR signal of that RJ45 port selects the relevant IR TX port to HDMI Input 1 signal to be combined and communicated for that input to be The WyreStorm MX-PP-POH is not only a switcher and HDBT OUT 4 HDBT OUT 8...
- Page 14 The Call-back function can be turned on/off NOTE The call-back function can be turned on/off by accessing the Wyrestorm COMCTL software. See by accessing the WyreStorm COMCTL software. NOTE The Call-back function can be turned on/off...
-
Page 15: Advanced Operation
Control of the matrix is possible through RS232 using third party RS-232 Setting each with its own fully routable serial control of display control systems or the dedicated Wyrestorm COM CTL software zone. included with your purchase (also downloadable from www. -
Page 16: Routing Serial Commands From The Mx-Pp-Poh
A 9-pin serial cable should be used between control system and matrix. NOTE If cascading matrices using the TX-POH-020 transmission card to expand distribution, a separate serial cable must be used for each additional matrix connected – serial commands cannot be cascaded. Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... -
Page 17: Edid Management - About Edid
EDID Management - EDID Presets About EDID Copy EDID from the HDMI sink ✳ device to the currently selected EDID (Extended Display Identification Data) is input port data generated from each display in the system to 1 2 3 4 communicate the capabilities of the device (720p, 2ch For example, when output-3 select Audio, 1080p, 7.1ch Audio). -
Page 18: Troubleshooting
2) If possible, always use test equipment prior to distribution i.e. the cable, receiver or matrix itself. installation and to troubleshoot any problems. Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... - Page 19 10) HDMI lead condition and quality – HDMI cables audio and EDID copy from the AVR may be required or and connectors are delicate and can be damaged much use an embedded EDID in the AMP or Matrix. easier than component or coax cable. Furthermore, lead quality varies dramatically, particularly in lower price NOTE If problems are experienced when an AV...
-
Page 20: Faq
RS-232 control and Ethernet third party control systems with your WyreStorm dealer. on 100m/328ft HDBaseT products, with 70m/230ft HDBaseT products removing Ethernet passthrough 6) IR dropout issues - these can be due to exterior functionality. -
Page 21: Maintenance
HDCP “keys” are assigned to a display when connected to a HDMI device normally. This doesn’t Are WyreStorm products compatible with HDMI 1.4? change when connected to a switch; it just assigns more HDMI 1.4 refers to a list of ‘features’ that a device is of them. -
Page 22: Provided Service
Limited warranty period: 2. Servicing Personnel: Do not attempt to service the All WyreStorm products are covered by a 3 year PARTS unit beyond that described in these operating instructions. and LABOUR warranty. During this period there will be no Refer all other servicing to authorised servicing personnel. -
Page 23: Disclaimer
WyreStorm reserves the right to change software, control codes and specifications without notice. WyreStorm will not be liable for any use of this information or any changes it may make to those products. The use of this information constitutes an agreement by the user to these limitations and exclusions. -
Page 24: Installation Reference Log
Installation Reference Log i. Input Reference Log output Output Output Location Display Details Display Resulution & Audio Cable number on Settings Number Matrix Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... - Page 25 ii. Output Reference Log output Output Output Location Display Details Display Resulution & Audio Cable number on Settings Number Matrix US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
- Page 26 US: +1 844-280-WYRE (9973) UK:- +44 (0) 1793 230 343 Email: support@wyrestorm.com WyreStorm Technologies reserve the right to change physical appearance or technical specification of this product at any time. Visit wyrestorm.com for the latest information on products.. 151028 Technical support: support@wyrestorm.com...
Need help?
Do you have a question about the MX-1616-PP-POH and is the answer not in the manual?
Questions and answers