Table of Contents
Advertisement
First,
dial
the
call
normally.
Then
activate
the Temporary
Tone feature
by pressing TONE (the * key).
You
can then press the numbers or symbols
you need, and your phqne will send
the proper signals.
Call Waiting
CALL WAITING
is a subscription
service,
available from most local
telephone service providers. Contact
your provider for details. While you are
on a call, you will hear an alert signal,
warning that a second caller is trying
to reach you.
..:.
To end the call, press @)
or place
the handset
back in the base.
The
phone
will automatically
go back to
rotary (PULSE)
service.
If you subscribe
to this service linked
with CALLER ID (CID), the name and/
or phone number of the second caller
can
be displayed
on the Handset
immediately
after hearing
the CALL
WAITING
alert. For more details, see
CALLER
ID (CID).
Switching
calls using
FLASH
.To
switch
over to the new call,
press the@:!5]key;
the first call
is put on hold.
.To
switch
back to the first call,
press the @:!5]
key again.
I
-(ft-
-fJj>-
Programming
Ringer
.
The handset ringer is capable of four
different
types
of ringer tones.
The
following sections detail how to select
different
ringer types and how to turn
off the handset
ringer.
Temporary
Tone
If you have rotary (PULSE) telephone
service (TONE/PULSE
switch is set to
PULSE),
this feature
allows you to
temporarily
switch to TONE dialing for
such purposes
as remote access to
answering
machines,
bank-by-phone
services, use of calling cards and other
special
services.
22
rF
6/24/98. 12:20 PM
22
~
--,-,
DT94102.p65
-~
Advertisement
Table of Contents
