Table of Contents
Advertisement
Control Panel
STOP
Press this key to stop any machine operation in progress, reset all alarm and error conditions, and
cancel incomplete function selections. The unit will return to Standby Mode.
START/COPY
For manual FAX sending. Lift handset, dial. A beep tone will sound. Press start and hang up handset.
This key also used to start copy function.
FINE
Select FINE for high resolution to increase clarity on transmitted documents or for Reports in Function
Mode. (See page 27.)
NORMAL
Select NORMAL for normal resolution or for User Options in Function Mode. (See page 23.)
PHOTO
Select PHOTO for pictorial documents or for setting of TSI/CSE ID Number and Send ID in Function
Mode. (See page20).
4. FAX
Select FAX for Auto FAX/TEL Switching Mode or for Testing the Machine. (See pages 14,33.)
PHONE
Select PHONE if you want to receive documents after you have a voice conversation or to enter
Function Mode (Send ID set, TSI/CSI ID Number set, User Option set, Report print out.)
5. "IN USE" LED
Shows that power is on and the unit is ready to receive and send.
6. "CALL" LED
Lights to confirm a voice request. (See page 15.)
7
Lights when paper is needed, or when paper cover or control panel is open.
5
6
4
3
1
9
2
Advertisement
Table of Contents
