Do you have a question about the 02-068 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for RiverRidge 02-068
Page 1
ASSEMBLY INSTRUCTIONS RiverRidge® Kids 3 TIER LADDER SHELF ITEM #:02-068 WHITE ITEM #:02-069 GRAY ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of the small parts. Care should be taken in unpacking and assembling this item to keep the small parts away from children.
Page 2
Send requests for missing or damaged parts replacements by email to : customer.service@ssi-rr.com or call toll free 1-(844)-223-5201 or order parts on line at www.riverridgehome.com THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 60 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS.IF LOADED WITH MORE THAN 20 POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
Page 3
Wood Dowel Cam Bolt Cam Lock Machine Screw (Φ6 x 20mm) Wood Screw (Φ3.5 x 20mm) Wall Screw (Φ3.5 x 30mm) Wood Screw (Φ3.5 x 8mm) Plastic Anchor Bracket Plastic lock strap top shelf left rail board top shelf right rail board middle shelf left rail board middle shelf right rail board bottom shelf left rail board...
Page 4
bottom shelf right rail board top shelf middle and bottom shelf Rear rail board Top rear rail board Top bar of left and right side frame Left side front leg Left side rear leg Right side front leg Right side rear leg TOOLS NEEDED FOR ASSEMBLY : FLAT &...
Page 5
1.Insert 1pc Wood dowel(A) into the wood dowel hole on the end of Top rear rail board(10) 2.Attach the top shelf left rail board(1) to Top rear rail board(10) by inserting the Wood dowel(A) into the hole on the top shelf left rail board(1).Make sure the hole on the Top rear rail board (10) is facing towards the back side of the shelf.
Page 6
1.Insert 1pc Wood dowel(A) into the wood dowel hole on the end of Rear rail board(9) 2.Attached the bottom shelf left rail board(5) to Rear rail board(9) by inserting the Wood dowel(A) into the hole on the bottom shelf left rail board(5). 3.Insert 1pc Wood screw(E) through the hole on the bottom shelf left rail board(5) and tighten it to the Rear rail board(9) by using a Philips Screwdriver.
Page 7
1.Insert 6pc Wood dowels(A) into the wood dowel holes on the middle shelf(8). 2.Attach the middle shelf(8) to the Middle Shelf rail board assembly by inserting the Wood dowels(A) into the wood dowel holes on the Middle Shelf Left rail board(3),Middle Shelf Right rail board(4) and Rear rail board(9).
Page 8
1.Insert 2pc Wood dowels(A) into the wood dowel holes on the Top bar(11). 2.Screw 2pc Cam bolts(B) into the pre-threaded holes on the Top bar(11). 3.Attached the top bar(11) to the Left side front leg(12) and Left side rear leg(13) by insert the Wood dowels(A) into the wood dowel holes and insert 2pc Cam bolts(B) into the cam lock holes on the Left side front leg(12) and Left side rear leg(13).
Page 9
1.Attach the Pre-assembled top shelf(7)and rail boards to Pre-assembled Left side frame, insert 6pc Machine screws(D) through the holes on the Left rail board(1) and tighten to the Pre-assembled Left side frame. 2.Repeat above step to assemble Middle and bottom shelf(8) to Pre-assembled Left side frame. WALL 1.
Page 10
WALL 1. Place the ladder shelf against the wall and close to bracket(J). 2. Insert the Plastic lock strap(K) through the hole on the bracket(J) which is assembled on the ladder shelf, then through the hole on the bracket(J) on the wall, then fasten the plastic lock strap (K) to fix the 2 brackets(J) firmly.
Page 11
Take appropriate action necessary to correct the hazard such as tightening of screws and taking any damaged parts away from the children. Thank you for purchasing this RiverRidge® Kids Products item. We hope you enjoy it, and consider purchasing other RiverRidge® items.
Need help?
Do you have a question about the 02-068 and is the answer not in the manual?
Questions and answers