Limited Warranty Statement - Diamond DE400.4 Owner's Manual

ABOUT THE DIAMOND AUDIO EXPERIENCE
Congratulations, you have just purchased one of the finest mobile audio products on the
market. Diamond Audio products represent the latest advances in electronical and acoustical
technologies in sound reproduction for your vehicle. Diamond Audio products are designed,
developed, and engineered in the USA using the latest innovative materials and components
to provide the finest sound reproduction possible. Every Diamond Audio product has been
verified and tested to ensure the best sounding and most reliable product on the market, if
installed properly. Diamond Audio products will provide many years of the ultimate listening
experience.
Please note that prolonged exposure to sound pressure levels in excess of 100dB can cause
permanent hearing loss. Using Diamond Audio products can exceed that level so please
exercise restraint in its operation in order to preserve your ability to enjoy its high fidelity sound
for many years to come.
Diamond Audio recommends our products be professionally installed by an authorized
Diamond Audio dealer to achieve the best possible system recommendation and installation.
This will ensure a true Diamond Audio listening experience and sound you would expect from
Diamond Audio products. With proper validation, using a Diamond Audio Retialer for installation,
your newly purchased amplifier, Diamond Audio will extend the product warranty from one year
to Two Years!!
Go ahead, Hear the Music
FEATURES
High density aluminum alloy heat sink with backlit logo
Class AB stereo /class D mono/FullRange Class D 5 channel and multi-channel options
Double sided and double layered PCB design for reduced footprint size
Fully variable 12 & 24dB crossovers and variable phase provide precise system adjustment
Remote level controller option, standard on Mono-channel models
Integrated guiding soft clip light for quick system set up
Frequency response 20 HZ – 30khz
Bridgeable / 2ch-4ch input switch control
Bass EQ boost +12DB @45HZ
Premium 4 guage power connections
POWER RATINGS
DE400.4
TOTAL RMS POWER 400 W RMS
RMS Power (4 )
RMS Power (2 )
Bridged (mono 4 ) 200 X 1(+100W X 2 - 3 CH mode)
Bridged (mono 2 ) N/A
Bridged (stereo 4 ) 200 W X 2
DE900.5D
900 W RMS
250 W X 1
400 W X 1
200 W X 2/ 400 X 1(2 )
.

LIMITED WARRANTY STATEMENT

Diamond Audio Technologies (DAT), a division of CV & DA Holdings Incorporated, warrants this product to be free from
defects in material and workmanship for a period of one (1) year from the original date of purchase, provided it was
purchased from an authorized DAT retailer within the United States. Product warranty period starts at the date of
purchase or one year past the manufacture date whichever is first. However, upon purchase and completion of the
on-line registration and installation by an authorized DAT dealer you warranty period will be extended to two (2) years.
This warranty extension offer will only be recognized upon completion of the on-line registration of your product within
thirty (30) days of the date of purchase.
THIS WARRANTY IS NOT TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER OF THIS PRODUCT
IN ITS ORIGINAL INSTALLATION. Original purchaser must reside in the United States and be able to provide proof of
purchase and installation with the sales receipt and completion of online regoistration from the authorized DAT retailer that
sold and installed the product.
Should a manufacturing defect occur during above said warranty period, DAT will replace or repair the defective product
with a product of the same or equivalent value and performance, at DAT's discretion.
Damage or failure caused by any of the following is not covered under this warranty policy: negligence, improper use,
abuse, product modification, unauthorized repair attempts, accident, acts of God, misrepresentations by DAT retailers, and
improper/inadequate packaging during return shipping.
Warranty is void if serial numbers have been removed, altered or defaced.
HOW TO OBTAIN WARRANTY SERVICE
In the event a DAT product should require service, you should visit the authorized DAT retailer you purchased the product
from and they can expedite your claim. All claims must fall into the guidelines listed above and be accompanied by a copy
of the original sales and installation receipt from that authorized D AT retailer.
Product returned for warranty service must be freight-prepaid, properly packaged and clearly marked with the Return
Authorization (RA) number issued by DAT. Any product returned to DAT that is improperly packaged, does not have a
RA number clearly marked on the package, or never received a RA number may be refused upon delivery. DAT does not
assume responsibility for lost or misdirected product.
Repair or replacement under this warranty is the exclusive remedy of the consumer. DAT shall not be liable for any
incidental or consequential damages for breach of any expressed or implied warranty on this product. Some states do not
allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may
also have other rights that may vary from state to state.
Customers outside the United States should contact their local sales office to obtain information on pricing, exchange unit
availability, instructions, service and warranty/non-warranty replacement or repair.
Diamond Audio Technologies
1225 E.7th ST
LOS ANGELES,CA 90021
Tel: 213-261-4161
Fax: 213-947-4767
Web: diamondaudio.com
Service/Tech Support:
213-261-4161
Tech Support Email
techsupport@diamondaudio.com
15