D-Link DCS-6314 Quick Installation Manual page 8

Full hd outdoor fixed dome network camera

Hide thumbs Also See for DCS-6314:

Table of Contents

General Connection Using 12 V DC Power Adapter

1. Connect the network camera to a hub via an Ethernet cable.

2. Connect the supplied power cable from the camera to a power outlet.

Connection with a PoE Hub

If you are using a PoE hub, connect the IP camera to the hub via an Ethernet cable,

which will provide transmission of both power and data over a single cable.

D-Link DCS-6314 Quick Install Guide

Table of Contents