First Time Auto Tuning - Panasonic VIERA TH-40DS610U Operating Instructions Manual

First time Auto
Tuning
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
●
These steps are not necessary if the setup has been
completed by your local dealer.
●
Please complete connections (p. 7 - 9) and settings
(if necessary) of the connected equipment before
starting Auto Tuning. For information about the
settings for the connected equipment, read the
manual of the equipment.
1
Plug the TV into a live mains socket
and turn the power on
● Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
Please select your viewing environment.
Home
■
How to use remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select [Home]
Select [Home] viewing environment to use in your home
environment.
●
[Shop] is for shop display.
●
To change viewing environment later on, you will
need to initialise all settings by accessing Shipping
Condition.
Set up the network connection
Select your country
Select your area
Australia
12
English
Tick the TV signal mode to tune, and then select
[Start Auto Tuning]
3
The demonstration to explain how to use [my Home
Screen] is displayed. Follow the demonstration by
following the on-screen instructions, and then select the
desired [Home Screen].
Example: [Home Screen Selection]
Example: [TV Home Screen]
If tuning has failed check the RF cable, and the network
connection, and then follow the on-screen instructions.
●
Shop
●
●
●
●
: tune (search for the available channels)
: skip tuning
Select the type of [Home Screen]
Auto Tuning is now complete and
your TV is ready for viewing.
Note
The TV goes into Standby mode when no operation
is performed for 4 hours if [Auto Standby] in the Timer
Menu is set to [On].
The TV goes into Standby mode when no signal is
received and no operation is performed for
10 minutes if [No signal Power off] in the Timer Menu
is set to [On].
To retune all channels
[Auto Tuning] in [Tuning Menu] (Setup Menu)
To add the available TV signal mode later
[Update Channel List] in [Tuning Menu] (Setup
Menu)
To initialise all settings
[Shipping Condition] in [System Menu] (Setup
Menu)