Axess SBBT1203 User Manual

Bluetooth soundbar/fm stereo radio

Hide thumbs Also See for SBBT1203:

Table of Contents

Download this manual See also: Instruction Manual

User Manual

Please read the following instructions prior to operating your unit.

Manufacturer of this unit follows a principle of continious

improvement and has no responsibility for any changes that

are made to the unit or liability for these changes.

Thanks for your choice of our products.

Table of Contents

Need help?

Do you have a question about the SBBT1203 and is the answer not in the manual?

Page 1 User Manual Please read the following instructions prior to operating your unit. Manufacturer of this unit follows a principle of continious improvement and has no responsibility for any changes that are made to the unit or liability for these changes. Thanks for your choice of our products.
Page 2 Please read following instructions prior to operating your unit. Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any changes that are made to the unit or any liability for these changes. Thanks for your choice of our products. 8 9 10 15 16 MAIN UNIT...
Page 3 3. Enable the Bluetooth of the Bluetooth audio source device. Plug AC plug into the outlet socket for connecting the main power. 4. Pair and connect to SBBT1203(the unit) on the audio source device. If prompted for passcode, enter “0000”.
Page 4 RE-CONNECT TO THE BLUETOOTH AUDIO SOURCE DEVICE If the device is already paired with the SBBT1203, but became unconnected even with both Bluetooth devices turned on. You can re-connect them by following steps: 1. Press and hold the PAIR button on the unit or on the remote to re-link the audio source CONNECTING WITH OTHER DEVICES device.
Page 5 TROUBLE SHOOTING Symptom Possible Cause Solution Radio sound 1. The station is not tuned in. 1. Fine tune the station. distorted. 2. There is a poor signal in the 2. Unwind the wire antenna for area. best reception No radio sound. 1.