Case 3: Tel Only - Panasonic KX-FPG376 Operating Instructions Manual

2. Preparation

2.6 Case 3: TEL ONLY

2.6.1 Your situation
You wish to use the fax machine and an
extension telephone in a different room. Most
incoming calls are phone calls and the fax
machine is seldom used for fax reception.
2.6.2 How to setup
{FAX/START} {A}{B}
{SET}
{STOP}
{TALK}
{SP-PHONE}
1
Press {MENU}.
2
Press {#} then {0}{0}.
3
Press {SET}.
4
Press {SET} again to print the Quick Setup
Guide.
L If you do not wish to print it, press
{STOP}.
22
Off
{MENU}
{DIGITAL SP-PHONE}
QUICK SETUP
PRESS SET
PRINT SETUP?
YES:SET/NO:STOP
For Fax Advantage assistance, call 1-800-435-7329.
5
Press {A} or {B} repeatedly to display the
following.
6
Press {SET}.
L The {AUTO ANSWER} indicator turns
OFF.
7
Press {MENU}.
2.6.3 How to receive calls
You can receive a fax with the base unit, handset
or an extension telephone.
With the base unit
1. Press {DIGITAL SP-PHONE} to answer the
call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX/START}.
L The fax machine will start fax reception.
With the handset
1. Lift the handset and press {TALK} or {SP-
PHONE} to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*}{#}{9} (default fax activation
code) firmly.
L The unit will start fax reception.
L You can also press {FAX/START} on the
base unit.
Note:
L To receive fax documents using the handset,
you must set the remote fax activation to ON
(feature #41 on page 62) beforehand. The
default setting is "ON".
With an extension telephone
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*}{#}{9} (default fax activation code)
firmly.
3. Replace the handset.
L The fax machine will start fax reception.
SELECT A SETUP
=TEL ONLY [±]