Advertisement
Quick Links
User Manual for UL3-10K WIFI
User Manual for UL3-10K WIFI
1.
Initialize WIFI Module ....................................................................................................... 2
2.
WIFI Parameters Setting .................................................................................................... 3
3.
Get IP Address of WIFI ...................................................................................................... 7
4.
Problems & Solutions ........................................................................................................ 8
Table of Contents
Advertisement
Summary of Contents for Samil Power UL3-10K WIFI
- Page 1 User Manual for UL3-10K WIFI User Manual for UL3-10K WIFI Table of Contents Initialize WIFI Module ....................... 2 WIFI Parameters Setting ....................3 Get IP Address of WIFI ...................... 7 Problems & Solutions ......................8...
-
Page 2: Initialize Wifi Module
User Manual for UL3-10K WIFI 1. Initialize WIFI Module It’s necessary to initialize WIFI module before WIFI settings. The method is showed as below: ▲ ▼ Press these 3 buttons at the same time Initialize WiFi Parameters？ WiFi Reset WiFi... -
Page 3: Wifi Parameters Setting
User Manual for UL3-10K WIFI 2. WIFI Parameters Setting 2.1 After initializing WIFI module, you can search a wireless network named HF-LPB100 HF-LPB with a laptop. This network can be connected directly without any password, and connect it please. 2.2 Input the IP address 10.10.100.254... - Page 4 User Manual for UL3-10K WIFI 2.3 Click “STA Setting” and set as follow: (a) Input the network name password of your Router. (b) Make it enable to obtain an IP address automatically. (c) Click “Save” to save the settings. (Note: Don’t restart after saving successfully, please click “Back” to do following settings.)
- Page 5 User Manual for UL3-10K WIFI 2.4 Click “Other Setting” and set network parameters base on the monitor you choose. (1) If you choose to use local monitor, please set as follow: Protocol：TCP-Server Port ID: 60000 TCP Time Out Setting：300 Click “Save” below the page to save settings.
- Page 6 User Manual for UL3-10K WIFI 2.5 Click “Work Mode”, select “STA mode”, and then click “Save”. (Note: Don’t restart after saving successfully, please click “Back” to do following settings.)
-
Page 7: Get Ip Address Of Wifi
User Manual for UL3-10K WIFI 2.6 Go to the “Restart” page and click “OK” to restart. So far, settings of WIFI parameters are finished. 3. Get IP Address of WIFI After having finished setting WIFI parameters, user can get current IP address of WIFI through the LCD of inverter. -
Page 8: Problems & Solutions
User Manual for UL3-10K WIFI 4. Problems & Solutions 4.1 Failed to establish connection between WIFI module and Router. Solution: When the IP address you get from LCD is 0.0.0.0, please restart the power of inverter and try to read IP address again. If it still doesn’t work, maybe the SSID or password of Router have been incorrectly input when setting the WIFI parameters.