Advertisement
®
R&S
HA-Z900 / -Z1900
Connectors
The Yagi antennas have an RF connector in their handles. The female RF connector
with an impedance of 50 Ω allows you to connect the antenna to a spectrum analyzer
with an appropriate cable.
Risk of damage to the antenna
Make sure not to overload the RF input and keep within the maximum allowed signal
levels.
See
tions R&S
Recommended measurement equipment
Using the antenna requires an RF cable to connect it to a signal and spectrum ana-
lyzer.
Recommended cables:
●
R&S
Recommended spectrum analyzers:
●
R&S
●
R&S
●
R&S
Other equipment:
●
R&S
Measurement setup
1. Connect one end of the RF cable to the RF input (a female N connector) of the
antenna.
The RF input is integrated into the handle of the antenna.
2. Connect the other end of the cable to the RF input of the R&S
FPH.
Technical Information 1328.6490.02 ─ 01
Chapter 1, "Specifications R&S
®
HA-Z1900",
on page 5 for details.
®
HA-Z901 RF Cable (3626.2757.02)
®
Spectrum Rider FPH
®
FSH
®
ZVH
®
HA-Z901 Carrying Bag (1328.6883.02)
®
HA-Z900",
on page 4 and
Operation
Chapter 2, "Specifica-
®
Spectrum Rider
7
Advertisement
