Advertisement
Electrical
personal safety, this dehumidifier
must be properly grounded.
Electrical Requirements
Do not change the plug on the power cord of this
dehumidifier.
Follow natioti electrical codes or local males and
grounded outlet protected with a 15-~p
fuse
or circuit breaker.
plug tiat mates with a standard 3-prong @ountig) wa~
shock hmard from the dehumitier.
Use of Adapter Plug
renditions, we stron~y recommend against use of an
adapter plug. However, ifyous~ elect to use an a&pter,
a temporary mnnection may be made where ld codes
permit. Use a ~listed adapter, avtiable at most lod
hardware stores and make sure the 2-prong wdl outiet is
properly grounti Figure 2). You shodd have the circuit
checked by a qtied electrician to make sure the oudet
is properly grounded
sure the larger prong goes into the larger slot. ~ provides
the proper poltity in the connecdon of the power cord. For
proper grounding, you must b screw the adapter to the
-
GROUND AND FIRM
CONNECTION HISTS BEFORE USE
Screwing the adapter to the cover screw til not ground
the dehumidifier tiess:
1. The oudet is tieady grounded through the how
wiring; and
2. me cover screw is meti and not tidated
OWNER:
Keep these instructions for future ~;e.
time
delay
(115-volt models only)
If the wdl outiet you
plan to use is ody a 2-
prong outlet, it is your
personal responsibility
to have it replaced with
a properly grounded 3-
prong wdl outiet.
Figure 1
DO NOT, UNDERti C&CtiStiCES, '"
CUT OR REMOVE_ ~ (GROUND)
PRONG ~OM = PO~R CORD.
always hold the adapter with one hand wMe ptiling the
plug with the other hand. H this is not done, the adapter
ground ted is likely to break with repeated use.
USE tie dehtitier unti a proper ground has
Use of Extension Cords
conditions, we strongly remmmend against the use of
an etiension cord. However, ifyous~ elect to use an
rating nameplate of the dehumidifier.
PREFERRED
INSURE PROPER
e
GROUND HISTS
BEFORE USE
Advertisement
