SAVE THE OVERALL PRESETS TO USB DISK
It is possible to SAVE the Overall Preset Registrations Banks to the USB Disk by following these
instructions:
-
Insert the USB Disk to the USB socket.
-
Press [SAVE ] button and the display will show :
01
indicates the progressive file number
001
indicates the registration file number
-
The display indicating your Overall Preset Registration Settings are saved into USB Disk,
with 24 Registration Memories stored to a single file.
New banks of Overall Preset Registration Settings can be stored in the USB disk and a new name
will be automatically assigned to each bank as follows:
LOADING THE OVERALL PRESETS DATA FROM USB DISK
Insert the USB Disk into the USB socket.
Press and hold the [USB FILES] button to access the Setting files in the USB Disk.
The display shows:
To select the Setting page use the [/\][\/] buttons.
In a few seconds the display will show the first available file.
Use now the [/\][\/] buttons to select the desired Overall Preset file, then press [PLAY/LOAD]
button, display shows "Load OK".
01 REGST 001
02 REGST 002
03 REGST 003
... REGST ......
15