Chevrolet 2013 Spark Owner's Manual page 157

4. Press bluetooth settings.
5. Press pair device.
6. Press Search Bluetooth Device.
7. Press the desired device to pair
on the searched list screen.
8. Press Yes on the pop-up screen
of the Bluetooth device and
infotainment system.
9. When the Bluetooth device and
infotainment system are
successfully paired, the
displayed on the "pair device"
screen.
The connected phone is
highlighted by .
5 7
The indicates the
hands-free and phone music
function are enabled.
7
The indicates only hands-free
function is enabled.
5
The indicates only Bluetooth
music is enabled.
Pairing a Phone
When there is no paired device on
the infotainment system and the
SSP is not supported:
1. Press
5 7
is
2. Press telephone, then
press Yes.
3. Press Search Bluetooth Device.
4. Press the desired device to pair
on the searched list screen.
5. Input the PIN code (default:
1234) to the Bluetooth device.
When the Bluetooth device and
infotainment system are
.
Infotainment System
successfully paired, the
telephone screen is displayed on
the infotainment system.
When the connection fails, a failure
message is displayed on the
infotainment system.
If a Bluetooth device was previously
connected, the infotainment system
executes the auto connection.
However, if the Bluetooth setting on
the Bluetooth device is turned off, a
failure message is displayed on the
infotainment system.
Pairing a Phone
When a paired device is on the
infotainment system and the SSP is
not supported:
1. Press .
7-23