Overview Of The Product - Philips AT10 User Manual

3 Get started
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Power supply
The product is operated on the built-in
rechargeable battery.
Note
•
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
To recharge the built-in battery:
Connect the supplied USB cable to:
• the DC 5V socket on the back of the
product.
• the USB socket on a computer.
DC 5V
Battery status
Low battery
While charging
Fully charged or
charging stopped
Turn on or off
To turn the product on, slide the OFF/ON
•
switch to the right.
» The product switches to the last
selected source.
• To turn the product off, slide the switch to
the left.
Switch to ECO standby mode
In SD, USB, Audio-in, or Bluetooth mode,
the product switches to ECO standby mode
automatically in the following situations:
• Music playback is stopped for 15 minutes;
• There is no Micro SD card, USB device or
Audio-in cable connected for 15 minutes;
or
• Bluetooth connection is disconnected for
15 minutes.
To return to the SD/USB/Audio-in/Bluetooth
mode:
• Press to resume playback; or
• Slide the switch to turn the product off
first, then turn it on.
Battery icon ( )
behavior
Flashing
Solid on
Off
EN
5