..p14 ..p15 Thank you for purchasing this device, .p16-p17 please read the operating instructions ack Page carefully to familarize yourself with the features and modes of operation before using the Weather Station. WS5052B Weather Alarm Clock.indd 3 24/07/13 8:22 PM...
Page 4
• Dual alarm with snooze function (alarm will activate every five minutes) • Orange b • Altitude-setting for calculation of air pressure. • Battery: • 5 weather forecasts: sunny, partly sunny, cloudy, rainy, stormy, weather symbol can be selected manually. WS5052B Weather Alarm Clock.indd 4 24/07/13 8:22 PM...
Page 5
• Battery: 2 x AA, LR06, 1.5V • Battery: 2 x AAA, LR03, 1.5V ed manually. • 3 channels • Transmitting distance: 50M open area. • Sit at least 1 meter of the ground. WS5052B Weather Alarm Clock.indd 5 24/07/13 8:22 PM...
Then the display shows the outdoor temperature and humidity, in case of failure of reception, press “CHANNEL“ for more than 3 seconds to receive again. • The flashing Radio controlled symbol will disappear when connected. WS5052B Weather Alarm Clock.indd 8 24/07/13 8:22 PM...
• The display for the minutes is flashing. Use “+ “ and “-“ to select the minutes. Press “MODE “ to confirm. • The display for the year is flashing. Use “+“ and “-“ to select the year. Press “MODE “ to confirm. ion, WS5052B Weather Alarm Clock.indd 9 24/07/13 8:22 PM...
• When sh • The clock automatically changes from set-up mode to time display mode if no keys are pressed • Press “M for 20 seconds. • The clock • Press any k WS5052B Weather Alarm Clock.indd 10 24/07/13 8:22 PM...
Page 11
• The clock automatically changes from set-up mode to time mode if no keys are pressed for 20 seconds. • Press any key to turn off alarm when beeping. (The alarm sounds for 2 minutes if no key is pressed to stop it) WS5052B Weather Alarm Clock.indd 11 24/07/13 8:22 PM...
Page 12
Information to switch between the mode. • A tempera Max./Min. Indoor/Outdoor • The set-u Temperature & Humidity - Press “+” to display Max./Min. Indoor/Outdoor Temperature & Humidity. the minim • The minim WS5052B Weather Alarm Clock.indd 12 24/07/13 8:22 PM...
• The set-up process cannot be completed if the maximum temperature selected is lower than Humidity. the minimum selected temperature. • The minimum temperature selected must at least be 1°C below the maximum selected temperature. WS5052B Weather Alarm Clock.indd 13 24/07/13 8:22 PM...
• If you do • If you ad Illumination • The two r Press the key “SNOOZE/LIGHT“ to activate the display illumination for 5 seconds. WS5052B Weather Alarm Clock.indd 14 24/07/13 8:22 PM...
• If you do not adjust the altitude, the reading is the comparative air pressure. • If you adjust the altitude to “0”, the reading is the real local air pressure. • The two readings are different. WS5052B Weather Alarm Clock.indd 15 24/07/13 8:22 PM...
• Try and a • Also reme • Press and hold the key “CHANNEL” for 3 seconds to search for outdoor sensors. • If the con • If for any your read the manu WS5052B Weather Alarm Clock.indd 16 24/07/13 8:22 PM...
• If for any reason the indoor sensor and the outdoor lose connection and then reconnect, your readings will not be correct you will need to take batteries out and start again following the manual reset instructions. WS5052B Weather Alarm Clock.indd 17 24/07/13 8:22 PM...
Page 20
HOLMAN Industries: 47 Walters Drive, Scan the QR Code above to see Osborne Park, WA 6017. more information on this product Ph: +61 8 9204 1011 and the full iWeather product www.holmanindustries.com.au range. WS5052B Weather Alarm Clock.indd 20 24/07/13 8:22 PM...
Need help?
Do you have a question about the WS5052B and is the answer not in the manual?
Questions and answers