1. Manuals
  2. Brands
  3. Hunt CCTV Manuals
  4. Keyboard
  5. HKB-1100KI
  6. User manual

Hunt CCTV HKB-1100KI User Manual

Network keyboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Keyboard
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HKB-1100KI and is the answer not in the manual?

Questions and answers

Summary of Contents for Hunt CCTV HKB-1100KI

  • Page 1 Network Keyboard User Manual...
  • Page 2 User Manual of HKB-1100KI Network Keyboard Preventive and Cautionary Tips Before connecting and operating your keyboard, please be advised of the following tips: • Ensure unit is placed in a well-ventilated, dust-free environment. • Keep all liquids away from the keyboard.

  • Page 3: Table Of Contents

    User Manual of HKB-1100KI Network Keyboard Table of Contents Chapter 1 Introduction......................... 6 1.1 Overview..........................6 1.2 Features...........................6 1.3 Appearance..........................8 Chapter 2 Operation Guide........................9 2.1 User Account.......................... 9 2.2 Indicators & Buttons.......................9 2.3 Button Operation........................12 2.3.1 Operating Video Wall Display...................12 2.3.2 PTZ Control Buttons....................
  • Page 4 User Manual of HKB-1100KI Network Keyboard 4.1.4 Alarm Settings......................39 4.1.5 Exceptions........................ 41 4.1.6 Maintenance......................41 4.1.7 Stream Media Settings..................... 42 4.2 Decoder Settings........................43 4.2.1 Network Settings...................... 43 4.2.2 Serial Port Settings....................43 4.2.3 Output Settings......................44 4.2.4 Video Wall........................ 44 4.2.5 Decoding Status......................45...
  • Page 5 User Manual of HKB-1100KI Network Keyboard 5.3.7 Calling a Tour......................64 5.3.8 Setting a Group Tour....................64 5.3.9 Calling a Group Tour....................65 5.3.10 Operating Instant Playback..................65 5.3.11 Operating Image Switch..................66 5.4 PTZ Control..........................67 5.4.1 PTZ Control Function....................67 5.4.2 Setting a Preset......................
  • Page 6 User Manual of HKB-1100KI Network Keyboard 7.1.3 User Management......................97 7.1.4 Device Management....................99 7.1.5 Maintenance......................100 7.2 Configuring by Operator....................101 7.2.1 Device List.......................101 7.2.2 Input Settings......................102 7.2.3 Output List.......................104 7.2.4 AUX Functions......................105 7.2.5 Live View & PTZ Speed Settings................105 7.2.6 FTP Server Settings....................105...

  • Page 7: Chapter 1 Introduction

    User Manual of HKB-1100KI Network Keyboard Chapter 1 Introduction 1.1 Overview HBK-1100KI Network Keyboard can be used to control the camera/speed dome, display of decoded video on video wall, control of matrix, as well as support 1 channel of video view at up to 1080P resolution. Designed with touch screen, it is easy to operate and configure settings.
  • Page 8 User Manual of HKB-1100KI Network Keyboard  Display of decoded camera group on selected window;  Sequence display of decoded camera group on monitor;  Sequence display of decoded camera group on monitor group;  Display of video via MVC on video wall.

  • Page 9: Appearance

    User Manual of HKB-1100KI Network Keyboard 1.3 Appearance Front View: Description of panel: Serial No. Description Serial No. Description Record playback Functional buttons Numeric buttons PTZ control area Interface Description: Serial No. Description Serial No. Description Touch pen Line In...

  • Page 10: Chapter 2 Operation Guide

    User Manual of HKB-1100KI Network Keyboard Chapter 2 Operation Guide 2.1 User Account The keyboard user account is classified to two types: the admin and the operator. The admin user is authorized with the following operation permissions: 1. Add a maximum of 3 operators;...
  • Page 11 User Manual of HKB-1100KI Network Keyboard Functional Buttons: MON-G CAM-G Select monitor Select window Select camera Select monitor group Select camera group MULT TOUR GROUP Multi-division Call Set or call tour Set or call group Set mode PRESET CALL PATROL...
  • Page 12 User Manual of HKB-1100KI Network Keyboard 4-axis Joystick: Use the joystick to realize pan and tilt movement at 8 directions. The 4-axis joystick can be used to control the zoom; and the central button used as Enter button and to realize picture capture as well.

  • Page 13: Button Operation

    User Manual of HKB-1100KI Network Keyboard 2.3 Button Operation 2.3.1 Operating Video Wall Display Button Description Example Num+MON: select the video output channel to Press the 2+MON buttons to select the monitor be displayed on the video wall. Note: When the Num=0, the system enters the local live view mode.

  • Page 14: Other Buttons

    User Manual of HKB-1100KI Network Keyboard 2.3.3 Other Buttons Button Description Example Num+MAC: call the MAC command. Press the 1+MAC buttons to call the MAC command 1. SHIFT SHIFT+LOCK: lock/unlock the system. Press the SHIFT+LOCK buttons to lock/unlock the system.

  • Page 15: Input Method Shift

    User Manual of HKB-1100KI Network Keyboard 2.4 Input Method Shift Click the tab on the soft keyboard to enter the interface for inputting the English letters, and the can be used to switch the uppercase/lowercase. Click the tab on the soft keyboard to enter the interface for inputting the numerals.

  • Page 16: Quick Configuration Guide

    User Manual of HKB-1100KI Network Keyboard 2.6 Quick Configuration Guide Steps: When the keyboard has started up, it enters the following interface: For basic keyboard operation, select the Keyboard icon to continue and enter the login interface. Select admin on the login interface and then input the admin password (default: 12345) to enter the admin interface of keyboard operation.
  • Page 17 User Manual of HKB-1100KI Network Keyboard to back to the main interface. Click User on the main interface to enter the User-User List interface. 10. In the User List interface, click Add User to enter the Add User interface. Input the user name, password and verify the password.

  • Page 18: Quick Operation

    User Manual of HKB-1100KI Network Keyboard 13. The added device (s) for the current user can be displayed on the User List interface. 14. You can directly click the (Login) icon of a user to switch its operating interface. Or you can click Logout on the admin main interface, the message box “Logout Now?” will pop up. Click Yes to confirm the logout, or No to cancel the operation.
  • Page 19 User Manual of HKB-1100KI Network Keyboard 2. Press the Num + WIN keys to select the display window on the monitor. You can also directly touch the screen to select the display window. 3. Press the Num + CAM keys to select the input camera.

  • Page 20: Chapter 3 Local Keyboard Configuration By Admin

    User Manual of HBK-1100KI Network Keyboard Chapter 3 Local Keyboard Configuration by Admin You can configure the keyboard by locally, WEB page or by the configuration tool. This chapter introduces the local keyboard configuration. 3.1 Login Steps: Click the Keyboard icon on the startup interface. Select admin on the login interface and then input the admin password (default: 12345).

  • Page 21: Configuring Network Settings

    User Manual of HBK-1100KI Network Keyboard 3.2.2 Configuring Network Settings Configure the network settings of the keyboard, including the Port, IP address, Subnet Mask, Default Gateway, Preferred DNS and Alternate DNS. Click Apply to save the settings. Note: Make sure the DHCP is supported by the router before enabling the function. 3.2.3 Configuring Hardware Settings Sound Effect/Alarm Sound/Key Light: Click the corresponding checkbox to to enable the function, or remain...

  • Page 22: Configuring Time Settings

    User Manual of HBK-1100KI Network Keyboard 3.2.4 Configuring Time Settings Date: Click to select the date from the calendar. Time: Click to decrease or increase the time value. Click Apply to save the settings. 3.2.5 Selecting Language Language: Click to select English as the system language. Click Apply to save the setting.

  • Page 23: Calibrating Screen

    User Manual of HBK-1100KI Network Keyboard 3.2.6 Calibrating Screen In order to use the touch screen correctly, it needs to calibrate the screen positioning properly. Steps: Click Calibration to start the calibration of touch screen positioning. The system will pop up the Hint message box. Click Yes to continue the calibration. Use the touch pen to click the three spots marked as “+”...

  • Page 24: Device Management

    User Manual of HBK-1100KI Network Keyboard Note: When the upgrading is successful, the keyboard will restart automatically to complete the upgrade. Upgrade by USB-flash Disk Steps: Insert the U flash disk to the USB interface and then click USB Upgrade to enter the USB upgrade interface. Select the upgrade file from the disk and finally click Upgrade to start upgrading.

  • Page 25: Editing/Deleting Device

    User Manual of HBK-1100KI Network Keyboard Click Auto Search button at the upper left corner to enter the Device-Auto Search interface. Note: Only the device that is in the same network segment with the keyboard can be searched out by the keyboard.

  • Page 26: User Management

    User Manual of HBK-1100KI Network Keyboard Delete Device On the Device-Device List interface, select the device from the list to be deleted, and click to delete it. In the pop-up message box, click Yes to finish the deletion. 3.4 User Management Click User on the admin main interface to enter the User-User List interface.

  • Page 27: Setting The Related Device

    User Manual of HBK-1100KI Network Keyboard Click Add to finish the adding of user. 3.4.2 Setting the Related Device Purpose: To the added operators, they do not have the permission of adding devices. Perform the following procedures to relate devices to the operators. Steps: In the User-User List interface, click to enter the User-Device interface.

  • Page 28: Editing User Password/Deleting User

    User Manual of HBK-1100KI Network Keyboard Enter the User-Device interface, you can select the device from the list and click to delete the related device for the current user. In the pop-up message box, click Yes to confirm the deletion. Operator User Login On the User-User List interface, you can click (Login Operator) to directly switch to the Operator user login...

  • Page 29: Default

    User Manual of HBK-1100KI Network Keyboard Importing Configuration File Insert the U-flash disk to the USB interface on the keyboard. Enter the disk to select a file. Click Import to import the configuration file. Exporting Configuration File Insert the U flash disk to the USB interface on the keyboard. Click Export to export the configuration file named in kbCfg.bin.

  • Page 30: Logout

    User Manual of HBK-1100KI Network Keyboard Click Default on the admin main interface. And select default type in the pop-up box. Click Yes to continue the operation, or No to cancel the operation. 3.6 Logout Click Logout on the admin main interface, and the message box “Logout now?” pops up. Click Yes to confirm the logout, or No to cancel the operation.

  • Page 31: Chapter 4 Local Keyboard Configuration By Operator

    User Manual of HBK-1100KI Network Keyboard Chapter 4 Local Keyboard Configuration by Operator Steps: On the User Login interface, select the user name (operator) and enter password. If needed, check the checkbox of Remember Password to save the login password for future use. Click Login to enter the operator main interface.

  • Page 32: Network Settings

    User Manual of HBK-1100KI Network Keyboard 4.1.1 Network Settings Click Network on the remote settings interface to enter the Network Settings interface. You can enter the following settings interface to configure the network parameters: General Settings: Configure the NIC type, IP address, port, gateway, subnet mask, MAC address, DNS server address, and HTTP port of the current encoder device.

  • Page 33: Camera Settings

    User Manual of HBK-1100KI Network Keyboard You can set the RS232 port and RS485 parameters. 4.1.3 Camera Settings Click Camera on the remote settings interface to enter the Camera Settings interface. You can configure the video display, video parameters, record settings, motion detection, video loss detection, tampering alarm, privacy mask, and IPC management (for hybrid DVR and NVR only).
  • Page 34 User Manual of HBK-1100KI Network Keyboard settings to other camera(s). Configuring Record Settings Configuring Advanced Settings On the Record Settings interface, select the camera for configuration. Click Advanced to enter the Advanced Settings interface where you can configure the pre-record, post-record, expired time, redundant record, record audio, etc.
  • Page 35 User Manual of HBK-1100KI Network Keyboard Steps: Click the checkbox of Enable Schedule item. Select the day you want to set recording schedule. You can also select it to All Week. To schedule an all-day recording, click the checkbox of the All Day item. Select the recording type for the selected day to Continuous, Motion Detection, Alarm, Motion / Alarm or Motion &...
  • Page 36 User Manual of HBK-1100KI Network Keyboard Click the Set button beside Area Settings to set motion detection area. Click Start Drawing, and then use the mouse to click two points on the live view screen to draw area for motion detection. To clear the motion detection area (s), click Clear All.
  • Page 37 User Manual of HBK-1100KI Network Keyboard Select the camera for configuring video loss detection. Click the checkbox of Enable item to enable video loss detection. Click the Set button beside Arming Schedule to configure the arming schedule of video loss detection for the current camera.
  • Page 38 User Manual of HBK-1100KI Network Keyboard Select the camera for configuring video tampering detection. Click the checkbox of Enable item to enable video tampering detection. Set the sensitivity level to High, Middle or Low. Click the Set button beside Area Settings to set video tampering detection area. Please refer to the settings of motion detection area.
  • Page 39 User Manual of HBK-1100KI Network Keyboard Configuring IP Camera If the current Encoder device is Hybrid DVR or NVR type, you can also enter the Channel List interface by clicking Set beside IP Camera Management on the Camera Settings interface. Adding IP Camera: Click the IP Camera List tag to enter the IP camera management interface.

  • Page 40: Alarm Settings

    User Manual of HBK-1100KI Network Keyboard 4.1.4 Alarm Settings Click Alarm on the remote settings interface to enter the Alarm Settings interface where you can configure the alarm input, alarm output and manual alarm. Configuring Alarm Input Click Set beside Alarm Input to enter the Alarm Input Settings interface. Select the alarm input for configuration.

  • Page 41: Exceptions

    User Manual of HBK-1100KI Network Keyboard Click Set beside Alarm Output to enter the Alarm Output Settings interface. Select the alarm output for configuration. Set the Hold For (duration) time for the alarm output. Set the Dwell Time (duration) for the alarm output. Configure the Arming Schedule of the alarm output.

  • Page 42: Maintenance

    User Manual of HBK-1100KI Network Keyboard Select the handling method (s) by clicking the checkbox (s) for the selected exception type. Audible Warning: Audible beep when an alarm is detected. Notify Surveillance Center: Send an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC installed with Remote Client.

  • Page 43: Decoder Settings

    User Manual of HBK-1100KI Network Keyboard Steps: Click Stream Media on the remote settings interface to enter the Stream Media Settings interface. Enable the Stream Media by checking the checkbox. Input the IP address and port of the server. Note: The Server IP refers to the IP address of the PC on which the stream media software is running.

  • Page 44: Serial Port Settings

    User Manual of HBK-1100KI Network Keyboard Please refer to the Network Settings of the Encoder for details. 4.2.2 Serial Port Settings Click Serial on the remote settings interface to enter the Serial Port Settings interface. You can set the RS232 port and RS485 parameters. 4.2.3 Output Settings You can configure parameters for the display of decoded output video on monitor.

  • Page 45: Video Wall

    User Manual of HBK-1100KI Network Keyboard Select the display channel. Enable audio and configure it for a window if required. Set the video format and resolution of the decoded video output. Select the window-division mode (1/2/4-division). Configure window for relevant channel. (1) Select a window and its relevant channel.

  • Page 46: Maintenance

    User Manual of HBK-1100KI Network Keyboard You can view the working status of each decode channel, including the decode state, stream type, package mode, video/audio frame rate, etc. 4.2.6 Maintenance Click Maintenance on the remote settings interface to enter the Device Management interface. User Management: Add/edit/delete user account, and assign operating permissions for each user.

  • Page 47: Starting Local Live View

    User Manual of HBK-1100KI Network Keyboard 4.3.1 Starting Local Live View Steps: Select a camera from the input list and click the icon to start the local live view. You can press the NEXT or PREV button to view the video of the next or previous camera. 4.3.2 Live View by Channel-zero Steps: Click the...

  • Page 48: Editing A Camera

    User Manual of HBK-1100KI Network Keyboard 4.3.3 Editing a Camera Select a camera from the Input Settings-Input List interface, and click to edit the camera name, camera No., protocol and stream type. Note: The Camera No. should be set uniquely from 1 to 999999. 4.3.4 Setting Input Group Steps: Click Input Group to enter the Input Settings-Input Group interface.

  • Page 49: Output Settings

    User Manual of HBK-1100KI Network Keyboard the current group. You can click to delete the added camera. 4.4 Output Settings Click Output on the main interface to enter the Output Settings interface. Search by IP or domain is supported. Input the IP address or domain of the device in the text field and click the Search button.

  • Page 50: Editing An Output Channel

    User Manual of HBK-1100KI Network Keyboard Select the record type and file type. Set the start time and end time of the video files for playback. Click Search to search the matched video files. The searching results can be viewed on the Playback File List interface. Select the file for playback from the list and click Playback to play back the video file.

  • Page 51: Setting Output Group

    User Manual of HBK-1100KI Network Keyboard 4.4.3 Setting Output Group Steps: Click Output Group to enter the Output Settings-Output Group interface. Click to select the group No. from the drop-down menu. Click the Add Output key to enter the Add Output interface: Select the outputs from the list to be added to the group, and then click Add to finish the setting.

  • Page 52: Macro Settings

    User Manual of HBK-1100KI Network Keyboard Click to enter the editing interface. Edit the No. for the video wall / scene on your demand. Click OK button to save the setting. 4.5 Macro Settings The macro command can be used for operating a series of continuous actions in sequence. Operation: Press the “Num + MAC”...

  • Page 53: Playback

    User Manual of HBK-1100KI Network Keyboard Viewing Macro The added Macro commands are listed on the Macro Settings-Macro List interface. You can click to view each macro command. Running Macro Select a command from the list and click to run the command, or directly click Num + MAC keys on the interface to call the macro command.

  • Page 54: Playback By Usb File

    User Manual of HBK-1100KI Network Keyboard 4.6.1 Playback by USB File Steps: Connect your USB disk to the keyboard. Click the USB File tab on the Local Playback interface to enter the Playback by Local File interface. Select the video file from the USB disk for playback. Click Playback to play the selected video file.

  • Page 55: Playback By Time

    User Manual of HBK-1100KI Network Keyboard Input the Camera No. for playback. Select the record type and file type. If the encoding device is ATM DVR, you can input the Card No. Set the start time and end time of the video files for playback. Click Search to search the matched video files.

  • Page 56: Advanced Settings

    User Manual of HBK-1100KI Network Keyboard 4.7 Advanced Settings Click Advanced on the main interface to enter the Advanced Settings interface where you can configure the password, AUX key, live view performance and PTZ speed control settings. 4.7.1 Password Settings Click Password on the Advanced Settings interface to enter the Password Settings interface.

  • Page 57: Live View & Ptz Speed Settings

    User Manual of HBK-1100KI Network Keyboard 4.7.3 Live View & PTZ Speed Settings Click Performance on the Advanced Settings interface to enter the network performance and PTZ speed settings interface. It allows you set the network performance of local live view on keyboard. Five levels are selectable. You can also set the PTZ movement speed of the connected PTZ camera by using the joystick.

  • Page 58: Logout

    User Manual of HBK-1100KI Network Keyboard Enter the IP address of the FTP server. Enter the user name and password for login to the FTP server. Enter the file path to which the video files and captured pictures are uploaded. Click Apply to save the settings.

  • Page 59: Chapter 5 Keyboard Operation

    User Manual of HBK-1100KI Network Keyboard Chapter 5 Keyboard Operation 5.1 Shortcut Operation The operating user must log in the keyboard to realize all shortcut operations (except LOCK). Shortcut Operation: Press the Num keys on the keyboard to enter the shortcuts operation interface. Notes: ...

  • Page 60: Display Of Decoded Video On Monitor

    User Manual of HBK-1100KI Network Keyboard Press the ESC key on the keyboard to enter full-screen preview mode. Notes:  Up to 1080P resolution is supported for local live view.  User can press the 0+CAM keys to stop the live view of the current window. 5.3 Display of Decoded Video on Monitor 5.3.1 Setting Multi-division Display You can select different multi-division display modes for the selected output channel.

  • Page 61: Setting Camera To Monitor

    User Manual of HBK-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when user performs wrong operation. E.g., when the multi-division number entered is not supported by the current output channel, the message “Window mode error.” will appear. 5.3.2 Setting Camera to Monitor The selected input signal can be outputted and displayed by the decoding channel on the monitor.

  • Page 62: Setting Camera Group To Window

    User Manual of HBK-1100KI Network Keyboard windows, then the camera 1-16 will be displayed on window 1-16, camera 17-32 on window 1-16, and camera 33-34 on window 1-2 in cycle view mode. Note: The dwell time for the cycle view is set in the input group setting interface, refer to 4.3.4 Setting Input Group.

  • Page 63: Setting Camera Group To Monitor Group

    User Manual of HBK-1100KI Network Keyboard Note: Corresponding error message will appear on the lower-left corner of the screen when you perform wrong operation. 5.3.5 Setting Camera Group to Monitor Group The selected camera group signal can be outputted and displayed by the decoding channel on the selected monitor group.

  • Page 64: Calling A Tour

    User Manual of HBK-1100KI Network Keyboard Up to 8 tours can be supported currently. The dwell time of the tour is the length of time used for switching from one camera to the next camera in the tour. All cameras are set with the same dwell time. Notes: ...

  • Page 65: Calling A Group Tour

    User Manual of HBK-1100KI Network Keyboard Press the Num + ENTER keys to set the camera group (CAM-G) number. Repeat step 3-4 to set other monitors and camera groups. Press the SET key to finish the group tour settings. Notes: ...

  • Page 66: Operating Image Switch

    User Manual of HBK-1100KI Network Keyboard 4. Press the key to enter the instant playback interface. Notes:  The local playback by time is not supported.  You can press the button to stop the instant playback. Other playback operation: Rotate the outer ring of the shutter in clockwise direction to speed up the playback, with the max.

  • Page 67: Ptz Control

    User Manual of HBK-1100KI Network Keyboard 5.4 PTZ Control 5.4.1 PTZ Control Function If the camera connected to the keyboard supports PTZ function, you are allowed to operate the LIGHT/FOCUS/IRIS/ZOOM/WIPER buttons to realize PTZ control. Two operation methods can be used to realize PTZ control: Method 1: Press the Num + MON keys to select the monitor.

  • Page 68: Calling A Preset

    User Manual of HBK-1100KI Network Keyboard Steps: Press the Num + CAM keys to select the input channel. Operate the joystick to move PTZ to the desired position. Press the Num + PRESET keys to set the current position as the preset with entered number. Notes: ...

  • Page 69: Setting A Patrol

    User Manual of HBK-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when you perform wrong operation. 5.4.4 Setting a Patrol Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera.

  • Page 70: Calling A Patrol

    User Manual of HBK-1100KI Network Keyboard Input Num and press the ENTER key to set the preset number, stop time and speed respectively. Press the SET key again to finish the patrol settings. Notes:  It is invalid to input the 0+CAM keys in the current operation mode. ...

  • Page 71: Setting A Pattern

    User Manual of HBK-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when you perform wrong operation. 5.4.6 Setting a Pattern Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera.

  • Page 72: Calling A Pattern

    User Manual of HBK-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when you perform wrong operation. 5.4.7 Calling a Pattern Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera.

  • Page 73: Calling Pan Scan

    User Manual of HBK-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when you perform wrong operation. 5.4.8 Calling Pan Scan Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera.

  • Page 74: Aux Functions

    User Manual of HBK-1100KI Network Keyboard 5.5 Aux Functions The keyboard is designed with AUX1 and AUX2 keys on its panel. You are allowed to configure Aux function for AUX1/AUX2 key on the operator user interface. By default settings, the AUX1 is selected to two-way audio and the AUX2 to picture capture function.

  • Page 75: Recording

    User Manual of HBK-1100KI Network Keyboard Note: When the current window is configured with multiple channels for display (in cycle view mode), the error message will appear on the screen as well. 5.5.3 Recording The video from the camera can be recorded and saved in the local U-flash disk or uploaded to FTP server as well. Operation method 1: Press the Num + MON keys to select the output channel.

  • Page 76: Chapter 6 Server Operation

    User Manual of HBK-1100KI Network Keyboard Chapter 6 Server Operation 6.1 Control of MVC Through the HBK-1100KI keyboard, you can configure and control the Multi-function Video Center (MVC). 6.1.1 Login Steps: Click the Server icon on the startup interface to enter the Server Login interface. Select the Login Mode to MVC/Subdomain/Matrix Access Gate.
  • Page 77 User Manual of HBK-1100KI Network Keyboard M_ENC: Encoding module M_DEC: Decoding module M_CODE: Code distribution module M_CAS_IN: Input cascading module M_CAS_OUT: Output cascading module M_INTEL: Intelligent module M_ALARM: Alarm module V6_DEC: V6 decoding module V6_CAS: V6 cascading module MVC_B10: MVC B10 MVC_B11: MVC B11 MVC_B12: MVC B12 M_DS: Domain system...

  • Page 78: Camera List

    User Manual of HBK-1100KI Network Keyboard 6.1.3 Camera List Viewing Camera List Click the Camera tab to view the information of all cameras connected to the current MVC system, including the camera ID, channel No., IP address and port. The No. is used as CAM number in the Shortcut Operation. Setting Input Group Steps: Click Input Group to enter the MVC Input Group interface.

  • Page 79: Monitor List

    User Manual of HBK-1100KI Network Keyboard You can also set or edit the Cycle Time (1-65535s) for cameras here. Click Finish to return to the MVC Input Group interface, where you can view the successfully added cameras for the current group. Click Save to save the settings.
  • Page 80 User Manual of HBK-1100KI Network Keyboard Division Mode: The standard-definition decoding module (BNC output) supports 1 / 4-division mode, while the high-definition decoding module (VGA / DVI / HDMI output) supports 1 / 4 / 9 / 16-division mode. Enable Audio: To enable the audio output. Audio Window: Select the window for enabling audio output.

  • Page 81: Scene Settings

    User Manual of HBK-1100KI Network Keyboard Click OK to return to the MVC Output Group interface, where you can view the successfully added output channels for the current group. Displaying Video on Monitor The selected input signal can be outputted and displayed by the decoding channel on the monitor. Currently, the supported decoding resolution includes: QCIF, CIF, 2CIF, DCIF, 4CIF, 720p, 1080p, VGA, UXGA, etc.
  • Page 82 User Manual of HBK-1100KI Network Keyboard Click on the list to switch to the selected scene. Click the Scene Layout to enter the layout of the selected scene. Note: The scene of MVC can be configured on the iVMS-4100 client software. Click a grid to enter the following interface.

  • Page 83: Screen Settings

    User Manual of HBK-1100KI Network Keyboard 6.1.6 Screen Settings Configuring Screen Settings Click the Screen tab to configure video display on screen. Steps: Select the screen No.. Enable the screen display by clicking the checkbox. Select the screen mode, e.g., 2 x 2. Set the main screen No.
  • Page 84 User Manual of HBK-1100KI Network Keyboard Roaming Window Switch Steps: Configure the Roaming settings in the iVMS-4100 client software. Press the Num + AUX1 keys to select the screen. Press the Num + WIN keys to select the roaming layer of the screen. Press the Num + CAM keys to select the input camera.
  • Page 85 User Manual of HBK-1100KI Network Keyboard Click the Set Picture button to enter the Setting Background Picture interface. Select the picture file from the directory and click the Upload button to select the layer for the picture. Select the layer from the drop-down list. Two base pictures can be uploaded. Select OK to confirm the base picture settings.

  • Page 86: Control Of Analog Matrix

    User Manual of HBK-1100KI Network Keyboard 6.2 Control of Analog Matrix 6.2.1 Login Before you start: Make sure the analog matrix has been correctly connected to the keyboard before operation. Steps: Select the login mode to Analog Matrix on the Server Login interface. Enter the number of video inputs in the Input Number field.

  • Page 87: Operating Analog Matrix

    User Manual of HBK-1100KI Network Keyboard Select the protocol of the connected analog matrix. Currently four protocols are supported: ZT-1.0, ZT-2.0, EXTRON and CREATOR. Click Apply to save the settings. 6.2.3 Operating Analog Matrix With successful RS-232 communication between the keyboard and the analog matrix, you can switch the video input to be displayed on the monitor by following the steps below.

  • Page 88: Operating Ptz Control

    User Manual of HBK-1100KI Network Keyboard You can click the Copy All To button to copy the current RS-485 parameters to other PTZ addresses. 6.2.5 Operating PTZ Control Operating PTZ Movement Steps: Press the Num + CAM keys to select the connected analog dome or pan/tilt unit. Note: The Num must be the same as the PTZ address.
  • Page 89 User Manual of HBK-1100KI Network Keyboard Setting/Calling a Patrol • Setting a Patrol Steps: Input the Num + CAM keys to select the connected analog dome or pan/tilt unit. Press the SET key to enter the settings interface. Press the Num + PATROL keys to enter the patrol settings interface. Input Num and press the ENTER key to set the preset number, stop time and speed respectively.

  • Page 90: Access By Ivms Platform

    User Manual of HBK-1100KI Network Keyboard • Calling a Pattern Steps: Input the Num + CAM keys to select the connected analog dome or pan/tilt unit. Input the Num + PATTERN keys to call the defined pattern. 6.3 Access by iVMS Platform The accessible iVMS platforms include: iVMS-5000, iVMS-7000 and iVMS-8200.

  • Page 91: Managing Output Channel

    User Manual of HBK-1100KI Network Keyboard Click Login to log in to the platform. The system enters the Control Center Unit List as shown below: 6.3.2 Managing Output Channel Click on the list to edit the selected screen group. Log in to the iVMS platform, and click Organization->Monitor Screen Group to enter the following page: Click Layout to enter the Screen Layout interface:...

  • Page 92: Managing Input Channel

    User Manual of HBK-1100KI Network Keyboard The corresponding output channel is corresponding to the Index No. on the Screen Group interface of the keyboard, e.g., the index 1 corresponds to the 108_vga_0 output channel. Press the Index No. + MON keys (e.g., 1 + MON) on the keyboard to select the output channel. 6.3.3 Managing Input Channel The corresponding input channel is corresponding to the Index No.

  • Page 93: Local Live View

    User Manual of HBK-1100KI Network Keyboard Press the Index No. + CAM keys (e.g., 1 + CAM) on the keyboard to select the input channel. 6.3.4Local Live View On the Control Center Unit List interface after login, click the icon of a region item to enter the list of input channels added to this region.

  • Page 94: Playback

    User Manual of HBK-1100KI Network Keyboard 6.3.6Playback 1. On the Control Center Unit List interface after login, click the icon of a screen group item to enter the list of output channels. Select an output channel and click the icon to enter the playback interface: 3.

  • Page 95: Configuring By Admin

    User Manual of HBK-1100KI Network Keyboard Chapter 7 Keyboard Configuration by WEB Server You are also allowed to configure the keyboard parameters by WEB server. 7.1 Configuring by Admin 7.1.1 Login Open WEB browser, input the IP address of the keyboard (e.g., http://172.6.24.64) and click Enter. The system pops up a login interface.

  • Page 96: User Management

    User Manual of HBK-1100KI Network Keyboard On this interface, you can configure the hardware and network parameters of the keyboard. 7.1.3 User Management Click User on the left navigation bar to enter the User management interface: On this interface, you can add, edit or delete the user account. Adding a User Click the Add button to enter the Add Users interface.
  • Page 97 User Manual of HBK-1100KI Network Keyboard Deleting a User Select a user from the list and click the icon. In the pop-up message box, click OK to delete the selected user account. Setting User-Device Select a user from the list and click the button to enter the User-Device interface.

  • Page 98: Device Management

    User Manual of HBK-1100KI Network Keyboard On the User-Device interface, you can view the successfully added devices for the current user. You can also select the device from the list and click the icon to delete it. 7.1.4 Device Management Click Device on the left navigation bar to enter the Device management interface: On this interface, you can add, edit or delete the device.

  • Page 99: Maintenance

    User Manual of HBK-1100KI Network Keyboard Deleting a Device Select a device from the list and click the icon to delete it. 7.1.5 Maintenance Checking Device Work Status Click the Work Status on the left navigation bar to check the work status of the keyboard. Restoring Default Click the Restore Default on the left navigation bar to enter the default interface.

  • Page 100: Configuring By Operator

    User Manual of HBK-1100KI Network Keyboard To import the configuration file, click the Browse button and specify the directory of the file in the pop-up box, and click the Import button. To export the configuration file, click the Export button and specify the saving directory of the exported file. Upgrade Click the Upgrade on the left navigation bar to enter the upgrade interface.

  • Page 101: Input Settings

    User Manual of HBK-1100KI Network Keyboard After successful login, you enter the Device List interface: On the device list, select an encoding device and click the icon to enter the Network-Stream media interface to configure stream media for the device. 7.2.2 Input Settings Click Input Settings on the left navigation bar to enter the Input List interface: Editing a Camera...
  • Page 102 User Manual of HBK-1100KI Network Keyboard Setting a Camera Group Click the Group button on the Input List to enter the Input Group interface: Select the Group No. and edit the cycle time in the given text filed, and click Set button. Click the Add Camera key to enter the Add Camera interface: Select the cameras from the list to be added to the group, and then click Add to finish the setting.

  • Page 103: Output List

    User Manual of HBK-1100KI Network Keyboard 7.2.3 Output List Click Output Settings on the left navigation bar to enter the Output List interface: Editing an Output Channel By selecting an output channel from the list and clicking the icon, you are allowed to edit its output No.. Setting an Output Group Click the Output Group key on the Output List to enter the Output Group interface to add an output group.

  • Page 104: Aux Functions

    User Manual of HBK-1100KI Network Keyboard Click the icon to edit the video wall / scene No.. 7.2.4 AUX Functions Click the Aux Key on the left navigation bar to enter the Aux Key settings interface: On this interface, you can set the function of Aux Key 1 / Aux Key 2 to two-way audio, picture capture, or video wall/scene switch.
  • Page 105 User Manual of HBK-1100KI Network Keyboard Check the checkbox of Enable FTP. Enter the IP address of the FTP server. Enter the user name and password of login to the FTP server. Enter the file path to which the video files and captured pictures are uploaded. Click Save to save the settings.

  • Page 106: Chapter 8 Keyboard Configuration Tool

    User Manual of HBK-1100KI Network Keyboard Chapter 8 Keyboard Configuration Tool Purpose: The configuration tool of the HBK-1100KI keyboard is used to facilitate the parameters configuration of the keyboard. 8.1 System Requirements System requirement: 32-bit Windows XP / Windows 7. Running conditions: please place the application program in the same directory where the HCNetSDK.dll, hpr.dll, and Sadp.dll files locate.

  • Page 107: Login By Local Configuration File

    User Manual of HBK-1100KI Network Keyboard storage device via U-flash disk.  Remote Config File: Operate and edit the configuration file of the keyboard which has been exported to PC or local storage device via network.  Update Keyboard: Upgrade the keyboard via network. 8.3.1 Login by Local Configuration File Before you start Make sure the configuration file (kbCfg.bin) of the keyboard has been exported to your PC or local storage device.

  • Page 108: Remote Upgrade

    User Manual of HBK-1100KI Network Keyboard Click to select the saving directory for the configure file. Input the IP address and port number of the keyboard. Input the user name and password for login to the keyboard. Click Export to export the keyboard configure file to the defined directory, or click Export&login to export log in the software.

  • Page 109: Configuring Keyboard By Configuration Tool

    User Manual of HBK-1100KI Network Keyboard Input the IP address and port number of the keyboard. Input the user name and password for login to the keyboard. Click Update to start upgrading the keyboard. The upgrading process can be viewed on the Status bar. Note: Please do not shut down the keyboard when the upgrading is not finished.
  • Page 110 User Manual of HBK-1100KI Network Keyboard Select the Type to Single or Batch. Single IP: add single device each time. Batch IP: add multiple devices located in the same network segment. Enter the device IP for Single IP mode, or the Start IP and the End IP for the Batch IP mode. Note: The start IP and the end IP must be within the same network segment.

  • Page 111: Managing User List

    User Manual of HBK-1100KI Network Keyboard Modifying a Device Select a device from the list, and click to enter the Modify Device interface: You are allowed to modify the port, login user name and password. Click Modify to finish the modification. Deleting a Device Select the device(s) from the list and click .
  • Page 112 User Manual of HBK-1100KI Network Keyboard Adding a User Account Click to enter the Add User interface. Enter the username and password. Click Add to add the new user account. The successfully added user accounts are listed on the interface:...
  • Page 113 User Manual of HBK-1100KI Network Keyboard Deleting a User Account Select the user account(s) from the list, and click . The following message box pops up: Click OK to confirm the deletion. Modifying Password Select a user account from the list, and click to enter the Modify Password interface:...
  • Page 114 User Manual of HBK-1100KI Network Keyboard Enter the new password. Click OK to finish the password modification. Adding the Device to User Select a user account from the list and double-click it to enter the User Devices interface. Select a device or multiple devices from the device list on the left and then click The device (s) successfully added for the current user will be displayed in the list on right.

  • Page 115: Managing Channel List

    User Manual of HBK-1100KI Network Keyboard You can select the added device from the list on right and click to delete it from the current user account. Adding Stream Media Server to Device On the User Devices interface, select a decoder or multiple decoders from the list of added devices on right, and click to enter the stream media server settings interface: Check the checkbox of Stream Media Start to enable the stream.
  • Page 116 User Manual of HBK-1100KI Network Keyboard Modifying Channel Index by Single Enter the username of operator in the Channel Type field. Only the operator user account has the permission to operate channel management. Click to get the channel list. Select an item from the list, and enter the new index in the Channel Modify field. Note: The new index No.
  • Page 117 User Manual of HBK-1100KI Network Keyboard Select multiple items from the list, and enter the new index in the Channel Modify field. Note: The new index you enter refers to the starting index No. of the channel list. Click to finish the channel index modification. Deleting Channel(s) Select the channel(s) from the list to be deleted.

  • Page 118: Importing Configuration File

    User Manual of HBK-1100KI Network Keyboard 8.4.4 Importing Configuration File Click the Maintain on the menu bar to enter the Keyboard Maintenance interface. Select the directory of the keyboard configuration file. Enter the IP address of the keyboard. Enter the username and password. Click to import the configuration file to the keyboard.

  • Page 119: Appendix 1: Specifications

    User Manual of HBK-1100KI Network Keyboard Appendix 1: Specifications Model HBK-1100KI Control Mode IP-based 7” TFT LCD monitor with touch panel TFT LCD Panel Resolution: 800 × 480 Joystick 4-axis joystick Line In 1-ch, 3.5 mm connector (2.0 Vp-p, 1 kΩ) Audio Input / Output 1-ch, 3.5 mm connector (Linear, 560 Ω)

  • Page 120: Appendix 2: Upgrade By Ftp

    User Manual of HBK-1100KI Network Keyboard Appendix 2: Upgrade by FTP Enable the FTP service on PC and operate the following steps: Steps: Open the wftp software, and then select Security->Users/rights option. Create new user. Input the user name: target, password: target, and then click OK to continue. Select the user name to target.

Table of Contents