Connecting To Pc (Os Windows Xp) - D-Link DSL-2500U Quick Installation Manual

DSL-2500U

CONNECTING TO PC (OS WINDOWS XP)

1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between the Ethernet port located on the back
panel of the router and the Ethernet port of your PC.
3. Connect a phone cable between the DSL port of the router and the ADSL
OUT port of the splitter. Connect your phone to the PHONE port of the
splitter. Then connect another phone cable between a phone jack and the
ADSL IN port of the splitter.
4. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
5. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to obtain an IP address automatically (as
DHCP client).
1. Click the Start button and proceed to the Control Panel > Network
and Internet Connections > Network Connections window.
2. In the Network Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu
displayed.
Quick Installation Guide
3