Accessories For Positioning The Clothes - Fagor driron Installation And User Manual

3

ACCESSORIES FOR POSITIONING THE CLOTHES

For the correct operation of the Driron, the clothes must be positioned correctly in the wardrobe.
To help with this, the Driron comes with a set of accessories made from materials that are heat-
and humidity-resistant.
Hanger: the top part swivels to
make it easy to hang the garments
and place them in the wardrobe.
IMPORTANT
You must use the hangers
that come with the Driron as
they are made of heat- and
humidity-resistant material.
Tenter clip: This must be placed
on the bottom of shirts and T-shirts
for better ironing.
They do not need to be used with
garments made of silk or viscose or
for garments with a high content of
synthetic fibres, such as polyester,
acrylic, etc.
The Driron has two types of Tenter
clips: a 'strong' clip for shirts in
general or for more creased
garments; and another 'light' clip
for cotton T-shirts or garments which
may stretch or go out of shape with
the stronger clip.
How to use the clips
Once the shirt or T-shirt has been
buttoned up and placed on the
hanger, open a clip and insert the
bottom of the garment, making sure
that the clip is horizontal and in the
middle. Release the clip and let it
close. The garment should be
clipped tight and stretched along
the entire width of the clip.
When you place the garment in the
Driron, make sure that the clip
hangs freely in the wardrobe and
does not catch on other garments
or on the hangers at the bottom.
Hanger
Reinforced tenter clip
– 64 –
Light tenter clip