Panasonic DMR-E50 Operating Instructions Manual page 31

1 Add (maximum of 999 scenes)
Press [A, V, 4, b]
to select the place
Press
where you want to
at the
add the scene and
of the
press [ENTER].
[ENTER]
start point
scene.
Press [ENTER]
at the end point
of the scene.
Press [A, V] to
select "Exit"
and press
[ENTER].
The new scene is
inserted before the
highlighted scene.
Press [A, V] to select "Next" and press [ENTER].
(Repeat to add other scenes.)
I Move
Press [A, V, 4, b]
to select the scene
and press [ENTER].
Press [A, V, 4, b] to select the place
where you want to move the scene to
and press [ENTER].
The scene is moved and inserted before the
highlighted scene.
Repeat to move other scenes.
I Re-edit
Press
[A,
V, 4, b]
to select the scene
and press [ENTER].
Press [ENTER] at
the start point of
the scene.
Press [A, V] to select "Prev." or "Next" and
[ENTER]. (Repeat to re-edit other scenes.)
I Erase
Once a scene has been
erased, it is irretrievable.
Check carefully before
proceeding.
Press
[A,
V,
4, b] to select 7-- ~~S~BFFW
J
the scene and
Erase this scene?
press [ENTER].
'~-&y-y--j No---
-d
n SELECT
E,,,FROJ~%RflURH J
Press [A, V] to
Press
at the
of the
[ENTER]
end point
scene.
select "Exit"
and press
[ENTER].
The re-edited
scene replaces the
old one.
press
Press [4] to select
"Yes" and press
[ENTER].
The selected scene is
erased from the play
list.
Repeat to erase other scenes.
The play list itself is erased if
you erase all the scenes in it.
l
Use [ 441, [,,I and slow-motion (+ page 18) to find the start and end points.
l
You cannot specify an end point before a start point.
l
You may not be able to specify points within 3 seconds of each other.
l
Play pauses if the end of the last program is reached during this procedure.
l
You cannot edit still picture images.
l
Depending on the state of recording, the actual number of play lists or scenes that
can be recorded may be less than that specified in this manual.