Sans Digital ELITERAID ER104UT+(B) Detailed User's Manual page 21

checked and click OK. The disk should now be marked as a Basic disk.
If a disk appears as "Dynamic", right-click the disk icon, and select Revert to Basic Disk. Within a few
seconds, the disk should be marked as a Basic disk.
If a disk is marked "Not Initialized", right-click the disk icon and select Initialize Disk. An additional dialog
box appears allowing you to select which disks to initialize. Uncheck the SteelVine Processor Disk item and
click OK. Within a few seconds, the selected disk(s) should be marked as a Basic disk.
Note: Be sure that you select the correct disk based on the expected disk capacity to create a partition.
3. Right-click the configured disk's unallocated space and select New Partition. If the New Partition option is not
available, select the disk and initialize it first. To do this, right-click on the disk item and select "Initialize Disk".
21