Download Print this page

Silverline 675260 User Manual

1250w wet & dry vacuum

Advertisement

Quick Links

Thank you for choosing this product
Silverline Tools 3 Year Guarantee
• This guarantee becomes effective at the date of retail purchase.
PLEASE KEEP YOUR RECEIPT.
• If this product develops a fault within 30 days of purchase, return it to the
stockist where it was purchased, with your receipt, stating details of the fault.
You will receive a replacement or refund.
• If this product develops a fault within 3 years of purchase return it to;
Silverline Tools Service Centre
PO Box 2988
BA21 1WU
Include your original receipt, details of the fault, your name and address, place and
date of purchase. We do not refund carriage. All product should be in a suitably
clean and safe state for repair, and should be packaged carefully to prevent damage
or injury during transportation. We may reject unsuitable or unsafe deliveries.
• You must provide proof of purchase before any work can be carried out.
• All work will be carried out by Silverline Tools or its authorised repair agents.
• Any parts which are replaced will become the property of Silverline Tools.
• The repair or replacement of the product will not extend the period of guarantee.
• The repair or replacement of your product under guarantee provides benefits which
are additional to and do not affect your statutory rights as a consumer.
What is covered:
• The repair of the product, if found to be defective due to faulty materials or workmanship
within 3 years of purchase. If any part is no longer available or out of manufacture,
Silverline Tools will replace it with a functional replacement part.
• Use of the product in the UK.
What is not covered:
Silverline Tools does not guarantee repairs required as a result of:
• Normal wear and tear eg blades, brushes, belts, bulbs, batteries etc.
• Accidental damage, faults caused by negligent use or care,
misuse, neglect, careless operation or handling of the product.
• Use of the product for anything other than normal domestic purposes.
• Change or modification of the product in any way.
• Use of parts and accessories which are not Silverline Tools genuine components.
• Faulty installation (except installed by Silverline Tools).
• Repairs or alterations carried out by parties other than
Silverline Tools or its authorised repair agents.
675260_Instructions.indd 1
Yeovil
Users Manual
1250W Wet & Dry Vacuum
Product Code 675260
© November 2006
30/3/07 11:15:12

Advertisement

loading
Need help?

Need help?

Do you have a question about the 675260 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Silverline 675260

  • Page 1 • You must provide proof of purchase before any work can be carried out. • All work will be carried out by Silverline Tools or its authorised repair agents. • Any parts which are replaced will become the property of Silverline Tools.
  • Page 2 Product Familiarisation Introduction Protect your head Carefully read and understand this manual and any label attached • Wear safety goggles at all times, every day glasses are not to the tool before use. Keep these instructions with the product for sufficient for eye protection, as lenses are not impact resistant and 30Ltr Wet &...
  • Page 3 ASSEMBLY OPERATING INSTRUCTIONS • Push the dust bag flange onto the inlet stub, take care not to damage the bag. • Ensure the mains plug is disconnected. • Or for dry vacuum cleaning fit the optional dust bag. Switching on/off •...
  • Page 4 Wet vacuum cleaning: Blowing • Ensure the unit is unplugged from the power supply. Make sure the • Push the large end of the flexible hose into the blow connection tank is clean and free from dust and dirt. in the top of the motor housing. •...