Advertisement
Quick Links
VWR_Quick_Guide_VisicamTC20_Feb15_rev0.docx
Tablet Camera VisiCam TC 20
ECN# 630-2589
INSTALLATION QUICK GUIDE
Box contains:
1 10'' Tablet
1 CMOS Camera with WiFi module
1 Connection bifurcate cable (connects camera to wifi module)
1 Power supply (9Volt) for WiFi module, with plugs
1 Power supply (5Volt) for Tablet with USB cable, with plugs
1 Tiltable support for Tablet
1 User manual, 1 Quick guide
Remove all the parts from the package and check if any visible damage has occured
1. SWITCH-ON OF VISICAM TC20 TABLET CAMERA
Follow the instructions in the order as described below.
ATTENTION: before doing the connections, be sure that the Tablet is switched off
Camera
WiFi module
1 / 4
Advertisement
Related Manuals for VISICAM TC 20
Summary of Contents for VISICAM TC 20
- Page 1 1 User manual, 1 Quick guide Remove all the parts from the package and check if any visible damage has occured 1. SWITCH-ON OF VISICAM TC20 TABLET CAMERA Follow the instructions in the order as described below. ATTENTION: before doing the connections, be sure that the Tablet is switched off...
- Page 2 8. On the Tablet, go to Settings / Wi-Fi / and you will find the network created by the Wi-fi module of the camera, this is called “Wireless 11n AP-xxxxx” (where xxxxx is unique number for each VISICAM TC20 system). No password is required to connect to this network.
- Page 3 VWR_Quick_Guide_VisicamTC20_Feb15_rev0.docx 2. GENERAL CONSIDERATIONS This Tablet system is based on a Android Operating System, so you have always these 3 buttons available on the lower part of the screen BACK button touch this to close the activity. HOME button touch this to put in the background the activity; activity is not killed. OPEN APPLICATIONS button touch this to see all open applications 3.
- Page 4 VWR_Quick_Guide_VisicamTC20_Feb15_rev0.docx 4. HOW TO PREVIEW AND CAPTURE AN IMAGE After you login, touch PROJECT/NEW in the commands bar (right part of the screen), and you will see the live image coming from the camera (microscope and camera must be properly switched on) COMMANDS bar Current user Current window...