Using The Phone; Troubleshooting - ION PLUNGE Quick Start Manual

Using the Phone

Note: You must power on and pair Plunge with your Bluetooth device before using it to listen
to music or as a speakerphone.
Using the Phone:
When you have an incoming call, Plunge's speaker will play a ringtone.
1. To answer the call, press Plunge's Call Receive button.
Note: If you get an incoming call during music playback, the music will pause until you
end the call.
2. Speak into the microphone and adjust the call volume using the Volume buttons.
3. To end the call, press the Call End button.
4. To reject an incoming call, press and hold the Call Receive button.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source. Also, try to
reduce the overall volume of Plunge.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
7