Subscribe to Our Youtube Channel
Related Manuals for 909 AG125
Summary of Contents for 909 AG125
- Page 1 INSTRUCTION MANUAL AG125 1050W 125mm ( 5" ) SL IM RE A R H A NDL E A NGL E GRINDER...
-
Page 2: Table Of Contents
CONTENTS Warranty Power Tools Warranty For full details please visit us at www.909.com Introduction Environmental protection Description of symbols Specifications General safety rules Additional safety rules for angle grinders Safety instructions for all operations Further safety instructions for all operations... -
Page 3: Environmental Protection
Cautions and Warnings. Conforms to relevant standards for electromagnetic compatibility. Your 909 power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the For safe operation read instruction manual. -
Page 4: General Safety Rules
cord suitable for outdoor use reduces the risk of electric General safety rules shock. WARNING. Read all safety warnings and all instructions. f) To reduce the risk of electric shock, the manufacturer Failure to follow the warnings and instructions may result in recommends the use of a residual current device electric shock, fire and/or serious injury. -
Page 5: Additional Safety Rules For Angle Grinders
4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will 5) Service do the job better and safer at the rate for which it was a) Have your power tool serviced by a qualified repair... -
Page 6: Safety Instructions For All Operations
• Never try to operate the angle grinder without the guard Safety instructions for all operations in place. Safety warnings common for grinding, • Do not secure the angle grinder in a vice or work bench abrasive cutting-off operations: and use it as a static grinder. It can lead to serious injury. a) This power tool is intended to function as a grinder, •... -
Page 7: Further Safety Instructions For All Operations
h) Wear personal protective equipment. Depending on o) Do not operate the power tool near flammable application, use face shield, safety goggles or safety materials. Sparks could ignite these materials. glasses. As appropriate, wear dust mask, hearing p) Do not use accessories that require liquid coolants. protectors, gloves and workshop apron capable of Using water or other liquid coolants may result in stopping small abrasive or workpiece fragments. -
Page 8: Additional Safety Instructions For Grinding And Cutting-Off Operations
d) Use special care when working corners, sharp edges Additional safety instructions etc. Avoid bouncing and snagging the accessory. for cutting-off operations Corners, sharp edges or bouncing have a tendency to snag Additional safety warnings specific for the rotating accessory and cause loss of control or kickback. abrasive cutting-off operations: e) Do not attach a saw chain woodcarving blade or a) Do not “jam”... -
Page 9: Contents Of Carton
Unpacking Due to modern mass production techniques, it is unlikely that your 909 power tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to... -
Page 10: Know Your Product
Know your product Before using the angle grinder, familiarise yourself with all the operating features and safety requirements. Use the tool and accessories only for the applications intended. All other applications are expressly ruled out. 1. On/off switch 2. Power lock OFF/ON button 3. -
Page 11: Setting Up
Setting up Operation Multi-position front handle This angle grinder can be used for grinding and cutting steel, stone or ceramic workpieces such as pipe, box section, Screw the front handle (5) into rectangular, angle iron steel bar, house bricks and tiles. Do the most suitable mounting port not attempt to grind wood or a soft metal such as lead. -
Page 12: Replacing A Disc
5. Once the grinding or cutting is finished, pull in and 5. Place the disc onto the spindle with the label facing the release the on/off switch (1) to stop the grinder. angle grinder. The hole in the disc should locate onto the spindle and fit firmly into the spigot section of the inner WARNING. -
Page 13: Lubrication
11. Run the angle grinder under no load for at least one Cleaning minute to ensure the new disc is in good condition. 1. Keep the tool’s air vents unclogged and clean at all times. Make sure you are wearing all the safety gear and that you face the grinder away from you.
Need help?
Do you have a question about the AG125 and is the answer not in the manual?
Questions and answers