Table of Contents
Advertisement
Quick Links
OPERATOR MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
This manual provides information for:
Steam Jacketed Kettle
MODEL:
LKT-45G
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.
READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
POST IN A PROMINENT LOCATION
Instructions to be followed in the event user smells gas.
This information shall be obtained by consulting your
local gas supplier. As a minimum, turn off the gas and
call your gas company and your authorized service agent.
Evacuate all personnel from the area.
WARNING
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or
death. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this
equipment.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the consignee to inspect the container upon receipt and
to determine the possibility of any damage, including concealed damage. LoLo
Commercial Foodservice Equipment suggests that if you are suspicious of dam-
age to make a notation on the delivery receipt. It will be the responsibility of the
consignee to file a claim with the carrier. We recommend that you do so at once.
Manufacturer's Service/Questions 877-246-5656
Information contained in this document is known to be current and accurate at the time of
printing/creation. LoLo Commercial Foodservice Equipment recommends referencing our product
line website, www.getLoLo.com, for current product information and specifications.
PART NUMBER 156679 Rev. B (08/13)
Advertisement
Table of Contents
Related Manuals for LoLo LKT-45G
Summary of Contents for LoLo LKT-45G
- Page 1 NOTIFY CARRIER OF DAMAGE AT ONCE It is the responsibility of the consignee to inspect the container upon receipt and to determine the possibility of any damage, including concealed damage. LoLo Commercial Foodservice Equipment suggests that if you are suspicious of dam- age to make a notation on the delivery receipt.
-
Page 2: Important Warnings & Safety Precautions
MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN. WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND PROTECTIVE CLOTHING. CAREFULLY READ THE WARNINGS AND FOLLOW THE DIRECTIONS ON THE LABEL OF THE CLEANER TO BE USED. OM-LKT-45G... - Page 3 IMPORTANT - READ FIRST - IMPORTANT CAUTION: USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY LOLO COMMERCIAL FOODSERVICE EQUIPMENT OR THEIR AUTHORIZED DISTRIBUTORS CAN CAUSE OPERATOR INJURY AND DAMAGE TO THE EQUIPMENT, AND WILL VOID ALL WARRANTIES. IMPORTANT: SERVICE PERFORMED BY OTHER THAN FACTORY AUTHORIZED PERSONNEL WILL VOID WARRANTIES.
-
Page 4: Table Of Contents
Ann Arbor, Michigan 48113-0140 INTERTEK (ETL) 1950 Evergreen Blvd, Suite 100 Duluth, GA 30096 AMERICAN NATIONAL STANDARDS INST., INC. 1430 Broadway New York, New York 10018 Z223.1-1984 - National Fuel Gas Code Z21.30 - Installation Gas Appliances & Piping OM-LKT-45G... -
Page 5: Equipment Description
Equipment Description Congratulations on your purchase of LoLo commercial cooking equipment. LoLo takes pride in the design and quality of our products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment. To ensure best results, it is important that you read and follow the instructions in this manual carefully. -
Page 6: Inspect For Shipping Damage
Cut strapping or banding that closes the top of the cardboard shipping carton and secures it to the wood pallet. USE CAUTION whEN UNCRATINg lOlO EQUIPmENT. mETAl ANd PlASTIC bANdINg Lift carton straight up and off the kettle. Obtain help, if needed. -
Page 7: Installation Instructions
TIP: If possible, locate the kettle where a floor sink or drain is TO vENT STEAm AS NEEdEd. ImPROPER available and positioned directly under the kettle pouring lip. (See LoLo INSTAllATION wIll vOId ThE wARRANTY! LKT-45G Specification Sheet 159750 for pour path dimensions.) •... - Page 8 After the kettle has been connected to the gas supply, all gas line joints must be checked for leaks. DO NOT USE A FLAME TO CHECK FOR LEAKS. A thick soap solution or other suitable leak detector should be employed. OM-LKT-45G...
-
Page 9: Initial Start-Up
CONTACT COUld RESUlT IN SEvERE bURNS. light should come on, and heating should continue until the water boils. If the unit functions as described, it is ready for use. If it does not function as described, contact your LoLo Authorized Service Agency. OM-LKT-45G 9... -
Page 10: Operation - General Kettle Use
If the pilot does not light, turn power OFF and wait five minutes. At Photo 10-2 that time, follow the instructions for starting once again. If the unit repeatedly fails to light, contact a LoLo Authorized Service AvOId All dIRECT CONTACT wITh hOT Agency for assistance. - Page 11 If you want to restrict the flow of food solids during transfer, you will need an OPTIONAL lift-off cover with integrated strainer. NOTE: If an optional cover was not included with your kettle order, you can order one from your authorized LoLo Foodservice Equipment Distributor.
-
Page 12: Operation – General Kettle Use
USE OF OPTIONAl COvER FOR STRAININg OR CONdENSATE CAN CAUSE SERIOUS bURNS. The optional lift-off cover for the LKT-45G tilting kettle is designed with an integrated perforated strainer positioned at the front. This strainer can be used to pour off water,... -
Page 13: Cleaning
Rinse off the sanitizer thoroughly. NOTE: It is recommended that the unit be sanitized just before use. Photo 15-2 Don’t use metal implements or steel wool when cleaning. OM-LKT-45G 13 Don’t scrape with tools, steel wool or other... -
Page 14: Maintenance
Cleaning If there is difficulty removing mineral deposits or a film left by hard water or food residues, use a de-liming agent such as LoLo De-limer De-Scaler (Part Number 156707), Lime- Away from ECOLAB or an equivalent, following manufacturer directions. Rinse and drain the unit thoroughly before use. - Page 15 ImPORTANT: If most or all of the jacket water is lost due to a leak, contact LoLo at 877-246-5656 or your LoLo authorized service provider. The source of the leak will need to be determined and repaired; and the kettle jacket refilled with chemically treated water.
- Page 16 CAN CAUSE INjURY TO ThE the component is faulty. If this determination is made, contact a LoLo Authorized OPERATOR ANd dAmAgE TO ThE EQUIPmENT ANd Service Agency for assistance.
-
Page 17: Troubleshooting Guide
Troubleshooting Guide Your LoLo kettle is designed to operate smoothly and efficiently if properly maintained. However, the following is a list of checks to make in the event of a problem. Wiring diagrams are furnished inside the service panel. CAUTION: USE OF ANY REPlACEmENT PARTS OThER ThAN ThOSE SUPPlIEd bY lOlO COmmERCIAl FOOdSERvICE EQUIPmENT OR ThEIR AUThORIZEd dISTRIbU- TORS CAN CAUSE INjURY TO ThE OPERATOR ANd dAmAgE TO ThE EQUIPmENT ANd wIll vOId All wARRANTIES. - Page 18 Main burner comes on but Authorized a. Check burner ground for bad wire or connection. Replace if will not stay on. Service Rep Only necessary with high temperature wire. b. Check for low gas supply pressure. If necessary, replace ignition control module. OM-LKT-45G...
-
Page 19: Parts Lists & Diagrams
ELBOW 90 DEG 1 156527 TILTING 45 GAL GAS KETTLE SHELL ASSY 010108 STREET 1/2” NPT 1 156099 KETTLE BODY ASSY, TILTING 25 PSIG, 304 INTERIOR, LKT-45G VALVE SAFETY, 25 PSI 141362 1 097007 PIPING WATER FILL ASSEMBLY 1 139832B... - Page 20 BOM Table 156121 ITEM NO. PART NUMBER Description 137880 GEAR CARRIER ASSEMBLY, 2" BORE 156717 SHAFT, HANDWHEEL, LOLO 128001 GEAR, WORM, 12DP MS49861 GEAR SECTOR ASSEMBLY 012031 KEY, GIB HEAD, 1/4" X 1-1/4" 012614 PIN ROLL 1/4" DIA X 1-1/4" LONG...
- Page 21 004185 ELBOW 90 DEG STREET 1/2" NPT 004187 VALVE SWING CHECK VALVE GATE 1/2" NPT 004180 HAMMOND 011146 PLUG PIPE 1/2 NPT 156046 VALVE SAFETY, 25 PSI 096905 ELBOW 1/2 NPT, 90 DEG STREET 078938 PIPE DOPE 1 OZ OM-LKT-45G 21...
- Page 22 CONNECTOR 3/8" NPT 45 1 156678 TERMINAL BLOCK WELDMEN 1 156675 SEALTITE CONDUIT 4 078546 SCREW, HEX HEAD CAP, 1/4- RIGHT SIDE SECTION VIEW SECTION B-B (ACCESS PANEL REMOVED) SCALE 1 : 4 SECTION C-C SCALE 1 : 4 OM-LKT-45G...
- Page 23 FUSE 3.0 AMP TYPE 3 AG 069789 SCREW HEX SLOTTED HD W/WASHER #8-32 X 3/8" 122192 CONTROL BOARD ASSEMBLY, WATER LEVEL 099292 STANDOFF 156504 40VA TRANSFORMER, 120VAC PRI, 24VAC SEC 005056 SCREW ROUND HEAD 8-32 1 1/4" 071256 NUT HEXHEAD KEPS 10-32 ITEM NO. OM-LKT-45G 23...
-
Page 24: Parts Lists & Diagrams
1/2" SS GAS TUBING (QTY 2) 1 012733 SPACER NIPPLE 1/2” NPT X 8 078546 SCREW, HEX HEAD CAP, 1/4-20 x 5/8" 009816 3-1/2” BLK 1/2” SS GAS TUBING 156674 SPACER 012733 SCREW, HEX HEAD CAP, 1/4-20 X 5/8” 078546 (QTY 8) OM-LKT-45G... -
Page 25: Electrical Schematic
Electrical Schematic OM-LKT-45G 25... - Page 26 5925 I-55 South • Byram MS 39272 877-2GO-LOLO (877-246-5656) • Fax 877-504-4073 www.getLoLo.com © 2013 LoLo Commercial Foodservice Equipment. All Rights Reserved. PART NUMBER 156679 Rev. B (08/13)