Bar And Chain Combinations; Saw Chain Filing And File Gauges; Ec-Declaration Of Conformity - Husqvarna T425 Operator's Manual

Guide bar and saw chain combinations
The following cutting attachments are approved for the model Husqvarna T425.
Length, inch Pitch, inch
10 1/4
10 3/8
Saw chain filing and file gauges

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain
saw Husqvarna T425 from 2014's serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), is in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100:2010, CISPR 12:2009, EN ISO 11681-2:2011.
Notified body: 1008, TÜV Rheinland InterCert kft. 1132, Budapest, Váci út 48/a-b, Hungary, has carried out EC type
examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC type
examination in accordance with annex IX, have the numbers: M3 69248487 0001
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna December 29, 2014
Per Gustafsson, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation).
TECHNICAL DATA
G u d i e b r a
Gauge, mm Max. nose radius
1,3 R10
1,3 7 T
S a w c
Type Length, drive links (no.)
Husqvarna H00 60
Husqvarna H36 40
h a n i
7
English – 37