Do you have a question about the AIRONE and is the answer not in the manual?
Questions and answers
Kate
February 15, 2025
How do I change the light bulbs
1 comments:
Mr. Anderson
February 15, 2025
To change the light bulbs in the ISLAND AND ANGULAR AIRONE hood:
1. For 12V Halogen G4 Bulbs: - Use a screwdriver to unscrew the glass support ring. - Remove the glass. - Replace the bulb with an identical one. - Reattach the protective glass and screw back the ring.
2. For Dichroic Lamp G4: - Use a screwdriver to remove the lamp. - Replace it with an identical one.
3. For LED Spotlights: - Replacement should only be done by a qualified technician using original spare parts.
This answer is automatically generated
Subscribe to Our Youtube Channel
Summary of Contents for ISLAND AND ANGULAR AIRONE
Page 1
INSTRUCTIONS FOR USING, MAINTAINING AND INSTALLING THE HOOD ISLAND AND ANGULAR HOODS...
INSTRUCTIONS FOR USING, MAINTAINING AND INSTALLING THE HOOD ATTENTION: The hood must only be installed by a qualified technician. The company accepts no liability if it is installed by an unauthorised person. Please read these instructions carefully before beginning the installation. Conserve this handbook together with the hood WARNINGS This appliance can be used by children aged from 8 years and above and persons with reduced physical,...
Hoods equipped for remote motors The hoods equipped for remote motors have a specific connector for the remote motor lead connection. The connect- or is situated inside the hood. Pass the remote motor lead into the hood through the aperture in the hood itself (usually near the fume exit hole) and join the two connectors.
Page 4
SOFT TOUCH CONTROL (Fig. 3) There are four soft touch buttons on this version and a variable colour led (green min. speed, red max. speed). > One button for turning the lights on and off. > One button for turning on at 2nd speed and for turning the motor off. N.B.
USE AND MAINTENANCE Before beginning any sort of cleaning or maintenance work, turn power off to the hood by turning the main switch to 0 (OFF). Changing the light bulbs 12V halogen G4 attachment: Use a screwdriver to unscrew the glass support ring (Fig. 6). Remove the glass and chan- ge the light bulb with another identical.
Need help?
Do you have a question about the AIRONE and is the answer not in the manual?
Questions and answers
How do I change the light bulbs
To change the light bulbs in the ISLAND AND ANGULAR AIRONE hood:
1. For 12V Halogen G4 Bulbs:
- Use a screwdriver to unscrew the glass support ring.
- Remove the glass.
- Replace the bulb with an identical one.
- Reattach the protective glass and screw back the ring.
2. For Dichroic Lamp G4:
- Use a screwdriver to remove the lamp.
- Replace it with an identical one.
3. For LED Spotlights:
- Replacement should only be done by a qualified technician using original spare parts.
This answer is automatically generated