Playback Operation; Switching Standby Operation On And Off - Odys DVD-DE250806 User Manual

Lcd-tv 17” dvd

Table of Contents

6 Playback operation

Connect the unit to a wall socket using the supplied network cable; the voltage of the network cable

matches the voltage specified on the back of the unit (AC 100 - 240 V, 50/60 Hz).

1. Press the POWER button on the control panel to turn the unit on. Now you can select any of the

functions with the remote. In addition, there are also buttons on the control panel for many

functions.

2. Press the SOURCE button to change to DVD mode.

3. Press the POWER button on the remote to put the unit in standby mode. The unit is still

supplied with voltage in standby mode, but is inactive. Use the POWER button on the remote to

turn the unit back on.

4. Insert the CD/DVD in the correct CD/DVD drive as described below.

5. Playback starts automatically and DVDs display a menu as usual from which you can select the

options using the direction buttons. To select an option, mark the desired option and press the

ENTER button. Normally, the DVD jacket contains additional information on the DVD content.

6. Push the STOP button once to interrupt playback. The screen displays the message "Press Play

Key To Continue". The player has saved the position where the playback was interrupted. Use

the PLAY button to resume play.

If you press the STOP button twice, the unit stops completely and loses the last played position.

Some DVDs may not support the resume function.

If this symbol is appears on the screen after you have pressed a button, the unit cannot

perform the function. Either the DVD or the current operating mode does not support this

function.

Disc Loading Steps and volume setting:

1. Press the power button on the front panel to turn on the power, the player will search a disc and

play it automatically in DVD mode.

2. Handle the disc with its printed side outward vertically to the disc tray (referring to the below

picture).

3. Slightly put the disc into the disc tray.

4. As disc is automatically taken in the disc tray fully, "Loading" will be highlighted on the liquid

crystal display. And the playback begins.

5. Press the VOL+ or VOL– buttons during playback to set the volume.

ODYS LCD-TV 17" DVD

Table of Contents