Subscribe to Our Youtube Channel
Related Manuals for Palm CompactFlash 10/100
Summary of Contents for Palm CompactFlash 10/100
- Page 1 CompactFlash Size Ethernet LAN Card For Both Notebook PC and Windows CE-based PDA/ Palm PCs/Pocket PCs Quick Installation Guide M73-APO01-440...
-
Page 2: Fcc Regulatory Statements
FCC REGULATORY STATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interface, and This device must accept any interface received, including interface that may cause undesired operation. -
Page 3: System Requirements
INTRODUCTION This CompactFlash Size Ethernet LAN Card is designed for Windows CE-based palm-sized PCs, handheld PCs and any computer with a CompactFlash slot. Plus, with connecting to a PCMCIA Adapter (not included), this CompactFlash Ethernet LAN Card turns into a PC card that plugs into any computer with a PCMCIA slot. -
Page 4: Software Compatibility
Microsoft Windows NT 4.0 Windows 98 Windows 2000 Windows ME Windows XP Lantastic 6.0 IBM OS/2 Warp Version 3 Hardware Compatibility for Processor Families: Supports PDA/Palm PC using MIPS4000 series, Hitachi Sh3 series, and Hitachi Sh4 series processors. - 2 -... -
Page 5: Parts Names
Parts Names CompactFlash Size Ethernet LAN card ACT LED Indicator with Direct Port RJ-45 port Link LED Indicator - 3 -... -
Page 6: Hardware Installation
CompactFlash Ethernet LAN Card. Inserting the CompactFlash Ethernet LAN Card 1. Insert the CompactFlash Size Ethernet LAN Card into Windows CE-based PDA/Palm PC by aligning the Compact Card with wide connector toward the CompactFlash slot. Installing into a Notebook PC (Only for users who also purchased this option) 1. -
Page 7: Connecting To The Network
CompactFlash Ethernet LAN Card and a 10Mbps hub or switch. To remove the CompactFlash Ethernet LAN Card, please refer to the Compact Card removal instruction in the document for your PDA/Palm PC. Note - 5 -... - Page 8 WinCE Services CD to your desktop PC. For more information, refer to the Online help. 3. Connect the PDA/Palm PC to the Host PC COM1 or COM2 port with a serial cable. 4. Once the connectiopn between Host PC and PDA/Palm PC is established, an “Mobile...
- Page 9 LAN Card” installed and appearing in the WinCE screen. 8. If your local LAN doesn’t run DHCP, you may have to manully configure the IP address under “Specific an IP address” option. 9. After you have followed the procedure described above and setup the Compact Card correctly, you may now use the pocket Internet Explore to browse the Internet.
-
Page 10: Windows 98 Installation
SOFTWARE NOTEBOOK PC ALSO PURCHASED THIS OPTION) Windows 98 Installation Make sure that the drivers of PC Card slot are well installed. The System Icon in the Status Area can report on its functionality. Once the PC Card is connected to your computer, Windows will automatically detect the new device. -
Page 11: Windows Me Installation
Click Next to continue. Windows will start to copy the appropriate driver to your system. your original Windows 98 installation CD- ROM, load it in the CD-ROM drive. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed. - Page 12 Windows will copy the appropriate driver to your system. If Windows ME asks you to supply installation CD-ROM, load it in the CD- ROM drive. Click Finish to complete the software installation. Windows NT 4.0 Make sure that the Network Services your original - 10 -...
-
Page 13: Windows 2000 Installation
already installed in the NT 4.0 system. Insert the Ethernet Adapter into one of the system's PCMCIA Slots Power up Windows NT 4.0 Open My Computer Open Control Panel Run the Network Select Adapters page Press Add to add network adapter Press Have Disk button Insert the driver disk into drive A: Specify the path to ”... - Page 14 Select Search for a suitable driver for my device (recommended). Click Next. Select Floppy disk drives and insert the disk associated with the PCMCIA Ethernet card in the disk drive. Click Next. - 12 -...
- Page 15 Click Next to make Windows install the appropriate driver for the new device. Click Yes to continue. - 13 -...
-
Page 16: Windows Xp Installation
Click Finish to complete the software installation. Windows XP Installation Once the device is connected, Windows will automatically detect the new device. Insert the device Driver Disk into the floppy disk drive of your system. software automatically (Recommended) and click Next. Click Install the - 14 -... - Page 17 Click Continue Anyway to proceed. 3. Wait while Windows copies the appropriate driver to your system. Click Finish to complete the software installation. - 15 -...
- Page 18 - 16 -...
Need help?
Do you have a question about the CompactFlash 10/100 and is the answer not in the manual?
Questions and answers