Using Your Citrus Juicer - Dash Go JB065 Instruction Manual & Recipe Manual

USING YOUR CITRUS JUICER

Always remember to use fresh, washed fruit. Always ensure that nothing is on the
Screen or in the Citrus Juicer before operating.
1. Cut the citrus fruits in half.
2. Exert slight pressure on the half of the citrus fruit when pushing the cut surface down
onto the Juicer Cone. Be sure not to put excessive pressure on the Juicer Cone. The
Cones will start turning and the juice will begin to flow into the Juice Container. Once
the juice reaches the 600 ml mark, empty the Juice Container. Never exceed the 600
ml mark.
Note: As soon as you stop pressing on the Juicer Cone, the Citrus Juicer will stop.
3. Unplug the Citrus Juicer before removing the Juice Container from the Base.
4. Turn the Juice Container counterclockwise and lift from the base. Pour the juice out
of the Juice Container. Make sure to clean the appliance after each use as soon as
possible so that the pulp does not dry and stick to the surface.
10
USING YOUR CITRUS JUICER
Tips and Tricks
You can influence the amount of pulp content in your juice by using the Screen
•
Opener. For a high pulp content, set the screen opener to the large dot mark so
that the openings in the screen are open wide.
In order to achieve the largest juice yield possible, the Juicer Cone will change
•
direction of rotation after several starts and stops.
If the Juicer Cone is not turning, check if there are fruit pips/seeds between the
•
Juicer Cone and the Screen and remove them.
11