Page 2
LCD WITH BUILT-IN DVR USER MANUAL Foreword This manual may contain technical inaccuracies, unconformity against the function and operation of the product, or typographical errors. This manual will be updated in accordance with product features reinforcement. The described product or program will be improved and updated regularly. The updating will be added into the new version without notice.
Page 4
LCD WITH BUILT-IN DVR USER MANUAL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE THE BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous coltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL IMPORTANT SAFEGUARDS Pelco-P、Pelco-D、Samsung、Panosonic、 P/T/Z Agreement Pelco-P LILIN Caution P/T/Z Bout rate 1200、2400、4800、9600 2400 Power source is dedicated on the rear of the set. It contains high voltage Parts. lf you remove the cover, it may cause fire or electric shock.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Chapter 1 Introduction 5.3 Appendix 3: System Default Informationv General This series is a quadruplex built-in DVR product with functions of AV preview, record, playback and Table 5-2 System Default Data internet browse.
Page 7
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Control Alarm recordCaculative way Controlling of PTZ and dome supported. Note 1: Caculate the HD interspace (Di) for sigle channel firstly: Suppose alarming rate is α%, size of Setting and calling preset, sequence and track supported.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Chapter 2 Installation Appendix 2: Hard Disk Capacity Calculation Method (For Your Inference) To Caculate HD capacity that connects to DVR on base of the requrie of record(compress parameter of Equipment and Components Checking.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Auxiliary function button Function 1.Switch between signal image and multi images in preview and playback mode. support to operate by cursor, remote controller and front panel 2.Enter/exit continuous selection when setting motion detection area and Navigation embeded;...
Page 10
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Parameter of audio & video RS-422 A-IN V-OUT V-IN ALM-OUT A-OUT Video code H.264 Baseline R x+ Tx + standard PAL/NTSC/SECAM Syestem ALM-IN Video code PAL:352×288(CIF)NTSC: 352×240(CIF) Picture 2-4 19 "...
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 2.4 Remote Control Charter 5 Appendix Appendix 1: Specification ① ② Table Technical data Item 4 channel produc 8 channel produc ③ Linus 2.6 operation system Main informaiton 4 operation :Record, reverse, preview &...
Page 12
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 4.10.2 Camera Advanced Setup Chart 2-5 Remote control buttons Enter Tool System menu Camera setup Adanced Setup interface Name Description Motion event response ① Turn on/off the device, same as the button of front panel Power on/off When motion event appear in destined area,there s some linkage response to setup: Trigger record, Triger...
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 2. 5 Hard Disk Installation 4.9.4 Maintainance The hard disk is not included in the factory fittings. Users can mount suitable hard disk by calculating its capacity referring to 5.2 appendix 2 . HD formatting Please make sure that important record file is backup before HD formatting.
Page 14
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Alarm Input and Output File Download : The alarm input device should be the type of GND connected alarm or voltage input alarm, Can be The File download operation part is on the right bottom of the screen. N/O(normally open) or N/C(normally closed).
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL User Management Option Card Chapter 3 Menu Including User Limit and Keyword Setup. Information interface at equipment port: Toolbar System Menu, Syetem setup, Adanced Setup 3.1 Menu Guide When login with Admin, User limit and keyword could be change directly.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Picture Preview 3.2 Menu Operation Including: Amend of Preview picture parameter on 4 channel, Sound preview, Record, Print screen function operation Press 【SET】 to enter system menu. , :Add / reduce picture contrast Press 【●】...
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Chapter 4 Operations instructions 4.8.2.1 Web Interface Brief Introduction 4.1 Powe r On Startup After powering on correctly, the Power LED will light green. The monitor will be auto-start. Please refer to 2.6 Rear Panel Connection for details of connection method.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Preview Operation Can setup Trigger of Alarm output: Trigger Sound Alarming, Upload center View Mode Switching Alarm , Linkage Alarm output Preview can be single / quad " "...
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL :The 4 icons indicate the alarm input status. When alarming, it changes into red . External Form 4-2 IE port added setup function alarm input can trigger multiple events handling. Please refer to "4.7 Alarm Setup". Content :...
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 、 、 、 :To set the view mode of "Single splits view", "4 splits view" , "8 splits view" ," 9 splits Network Connection view" :To adjust the screen, 8 pixels per unit. Network Setup 4.8.1 、...
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 4.3.1 Record Manually 4.6 Backup Please enter ( Tool Bar> - < Manual Record> to let the specific channel record or not. Enter Tool bar, Backup control interface, search and choose the record file, prss BACKUP to get inter Presss 【●】...
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 4.4 Camera Control 4. Setup of Time period, Channel no. and Time Scale, then press 【 】、【 】 to move focus to Search and use to operat. Time scale will show the searched record. 4.4.1 PTZ Control After searching over, press 【Fn】...
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 4.4.2 Motion detection setup Table 4-4 PTZ Operation Description Motion detection Setup including Sensitive Setup and Area Setup. Sensitive has High, standard, low for choice. Enter Tool Bar, System Menu, Camera Setup, Motion detetion to setup. Use mouse to setup Description Name Motion detection area.
Need help?
Do you have a question about the SCM-1981MR and is the answer not in the manual?
Questions and answers