Subscribe to Our Youtube Channel
Summary of Contents for TBK TBK-CON003
- Page 1 TBK-CON003 IP Keyboard User Manual IP KEYBOARD User Manual IP Keyboard TBK-CON003 Please read this manual carefully for correct use of the product and preserve it for reference purposes www.tbkvision.com...
-
Page 2: Table Of Contents
TBK-CON003 IP Keyboard User Manual INDEX Overview ............................3 Features ............................3 Technical Specification ......................... 3 Package Contents ......................... 3 1. Appearance ..........................4 1.1 Front panel and function keys introduction ................. 4 1.2 Rear panel interface introduction ..................4 2. -
Page 3: Overview
TBK-CON003 IP Keyboard User Manual Overview This Network Keyboard can be used to control the speed dome, as well as support 1 channel of video view at up to 1080P encoder. It is easy to operate and configure settings. Features 5’’... -
Page 4: Appearance
TBK-CON003 IP Keyboard User Manual 1. Appearance 1.1 Front panel and function keys introduction Fig.1 1.2 Rear panel interface introduction Fig.2 Input power : DC12V/2A Reservation output interface:RS485 (not available now) Power indicator ④ USB interface :reserved ⑤... -
Page 5: Function & Operation
TBK-CON003 IP Keyboard User Manual 2. Function & Operation 2.1 Connection Fig.3 As Fig.3 show, make sure the keyboard in the same LAN with the devices. Remark: The keyboard supports up to 255 device in each segment, when in “0” &“1”... -
Page 6: Add Device
TBK-CON003 IP Keyboard User Manual press“ ”key， and then choose user, you will see. Fig.5 You can change the password or you can create operator and password. Remark: after create the operator, it can not modified the operator name. 2.2.2 Add device After log in,the keyboard will search the IP device and assign a Dome ID for each device automatically, as below picture(Fig.6) shows. - Page 7 TBK-CON003 IP Keyboard User Manual If user want to add the more device, please press the “Menu” button, Fig.7 move the cursor to choose the “device management” and click “Enter” to enter the sub -menu, select “Search and Add” to confirm.
-
Page 8: Ptz Control And Image Switching
TBK-CON003 IP Keyboard User Manual 2.3 PTZ control and image switching 2.3.1 Device switching As the above fig. 6 show, the user could switch Dome by the corresponding Dome ID which is on the left of IP address list. Press “... -
Page 9: Preset Operation Instruction
TBK-CON003 IP Keyboard User Manual 【Preset】: [Preset]+number+[Enter] to enable the preset point. 【Menu】: press to enter Menu or to Return back. 【Addr】 : Address key, [Addr]+ID number+[Enter] to choose the corresponding IP address. 【0】～【9】: Number keys [0], [1], [2], [3], [4], [5], [6], [7], [8], [9]. -
Page 10: Shortcut Commend
TBK-CON003 IP Keyboard User Manual 2.5 Shortcut commend If speed dome supported shortcut commend, user can use the keyboard controller to call the shortcut commend to enable the function easily. The following are shortcut commends for the speed dome,please Press the Preset No.+Enter to enable those function:... -
Page 11: Factory Default
TBK-CON003 IP Keyboard User Manual Remark: 1. The keyboard controller support the encoder max 1080P, for the camera is more than 1080P, please use Sub Stream, so image will be displayed properly. 2. The keyboard controller is with screen standby function, when the controller is not operated for long time, the screen will be in standby mode, user can move the joystick or press any key to wake up the screen. -
Page 12: Troubleshooting
TBK-CON003 IP Keyboard User Manual 3.0 Troubleshooting Issue Possible Reason Solution IP address of the IP camera and Change either IP address of Can’t add the Camera controller is same keyboard or IP address of camera The command is inconsistent Check the dome manual, make Can’t run the Tour...
Need help?
Do you have a question about the TBK-CON003 and is the answer not in the manual?
Questions and answers