Sharp PC-1500 Instruction Manual page 119

All and more about Sharp PC-1500 at http://www.PC-1500.info
C.3. Printing Calculations
Using the CE-1 50 ln1erlace it is possible 10 make a prin1ed copy of a
series
of manual calcula·
tion• performed on the PC- 1500 Computer as in Figure I:
Figure I:
12000*. 055
700
?0<l+2S.S6
005.56
SIN 30
0.S
TX =.065
0.065
P=20000*TX
1300
P/J 2
108.3333333
To do 1his, simply set the Print Switch on the Interface to the "P" position :
To prevent the automatic printing of mnnunl calculations. the Print Si.•1itch must be pl;:1ced In
the ... " position. \Vi th the si.·1itch in this position. you
1nay still print out selected
results by
prefacing the computation wi th an LPRINT command (see LPRINT). Othe< commands which
caure printing or drawing, wch as LUST, LINE, and others. are also functional in this mode.
When printing, the color used will
be
the color which was previously specified. If you have just
turned the machine on. this will
be
whatever color pen you have selected to correspond to Color 0.
To change the color. you must issue the Color oommand (see appropriate section ).
The character size used to print manual calculations is dependent on the previous specification .
It the previous
cha(acter size
specified
was
size l or s i7.e 2 , then this size remains in effect. If
the
previous size. was larger than 2. then size 2 is used.
Automatic printing causes the printer mode to
be
$Ct to TEXT.
If
you were in GRAPH mode
ond
wish to rc:turn to this mode. you mus t issue the GRAPH command . (Printer modes arc
t!XPlaincd in
th ~
next section) .
117
Do not sale this PDF!!!