Table of Contents
Advertisement
Quick Links
Electrolux Outdoor Products
Via Como 72
23868 Valmadrera (Lecco)
ITALIA
Phone +39 0341 203111 - Fax +39 0341 581671
www.electrolux.com/mcculloch - www.electrolux.com/partner
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and
trademarks in several countries.
© Electrolux Outdoor Products Italy
The Electrolux Group. The world's No. 1 choice
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million
Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold
each year to a value of approx. USD 14 billion in more than 150 countries around the world.
PN 249342 REV. 02 (05/04)
Advertisement
Table of Contents
Related Manuals for Electrolux SUPREME 300
Summary of Contents for Electrolux SUPREME 300
- Page 1 The Electrolux Group. The world’s No. 1 choice The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
- Page 2 2 Strokes Engine totally McCulloch sintetyc oil or Partner oil 50:1 40:1 2,5% 1 ltr 20 cm 1 ltr 25 cm...
- Page 3 30cc 30cc 30cc 30cc 30cc 0,095" 197" 538249345 2,4 mm 5000 mm 249242 8" 228204B 200 mm 249242...
-
Page 4: General Description
A. General Description 1) ENGINE 12) AIR FILTER COVER 2) SHAFT 13) FUEL TANK CAP 3) THROTTLE TRIGGER 14) MUFFLER SHIELD 4) GRIP ADJUSTMENT KNOB 15) ENGINE/SHAFT JOINT 5) BLADE 16) FRONT HANDLE 6) NYLON STRING HEAD 17) REAR CONTROL GRIP 7) STOP SWITCH 18) SAFETY GUARD 8) FUEL ENRICHMENT LEVER... - Page 5 CAUTION! Danger of serious leg injuries. Maximum shaft speed. Take scrupulous care to follow the instructions in the manual. CAUTION! Danger of kickback. The blade is The cutting parts and muffler may capable of amputating arms and get very hot and cause burns. Wait legs.
- Page 6 be projected dangerously at a distance. • Do not use the machine under extreme Contact between the blades and any weather conditions such as very low extraneous objects could cause serious injury temperatures or in a very hot, damp climate. to the operator or other people or animals in •...
- Page 7 legs. The force of the kickback can cause the CAUTION! We recommend the use of operator to lose control of the machine. original accessories and Kickback can also occur when cutting with any replacements, which can be type of blade in the hazardous zone (see N1); we purchased from authorized therefore recommend cutting using the distributors.
-
Page 8: Fuel Mixture
Safety pole guard (not supplied with all CAUTION! Fire hazard. Never use the models) machine with a defective or damaged CAUTION! Never use a brush cutter muffler. without its safety pole guard correctly in place. CAUTION! Engine exhaust fumes are toxic. - Page 9 use of deteriorated fuel can seriously damage • During use, to prevent problems in starting the the engine). engine again, we strongly recommend that you avoid letting the fuel run out in the tank. Filling the tank CAUTION! If you spill any fuel, wipe it CAUTION! The following precautions off the machine.
- Page 10 plate. Tighten by turning clockwise. As you CAUTION! WE RECOMMEND THE tighten, hold the blade-plate assembly still by USE OF ORIGINAL ACCESSORIES inserting the wrench or screwdriver supplied in AND REPLACEMENTS, WHICH CAN the holes provided. BE PURCHASED FROM F5. “Tap and go” nylon string head AUTHORIZED DISTRIBUTORS.
-
Page 11: Carburetor Adjustment
H. Starting and stopping the engine • H4. Pump by pressing several times on the CAUTION! First read chapter “Safety bulb (C) until you see the fuel flow back into the Precautions” tank through the tube (D). Pull the starter cord until the machine starts. -
Page 12: Cutting Techniques
the figure by pressing in the point indicated by L5. Fuel filter To clean or replace the filter, remove the cap on the arrow for release. Clean the inside of the filter the tank and take the filter out using a hook or housing thoroughly (fig. - Page 13 decelerate the engine to minimum speed as CAUTION! In mounting the cutting running it at top speed without a load can utensils follow the instructions in the damage the engine severely. chapter entitled “Usable cutting Never raise the brush cutter above knee level tools and their installation on the during cutting.
-
Page 14: Environmental Information
recoil of the blade, make sure the supporting cup N1. CAUTION! Do not let the blade does not touch the ground. cut in the risk sector to prevent kickback (see paragraph “Safety N1. CAUTION! WE RECOMMEND precautions”). THE USE OF ORIGINAL ACCESSORIES AND Cutting with the blade is recommended for REPLACEMENTS;... -
Page 15: Declaration Of Conformity
Valmadrera, Italy, comply with European Directive: 98/37/EEC (Machine Directive), 93/68/EEC (EEC Marking Directive) & 89/336/EEC (Electromagnetic Compatibility Directive), directive 2000/ 14/EEC (Enclosure V). Valmadrera, 15.12.03 Pino Todero (Technical Manager) Electrolux Outdoor Products Italy S.p.A. Via Como 72, 23868 Valmadrera (Lecco) ITALY R. Technical data Displacement (cm ) .