Advertisement
Available languages
Available languages
Thank you for choosing this Proel product and for trusting our brand, which strives to be synonymous with professionalism, precision, high quality and
reliability. All of our products comply with EC regulations regarding audio equipment for continuous use.
Description
Low profile condenser phantom powered compact microphone, with activating switch. This microphone has an extended and flat frequency
response. This elegantly shaped microphone is available in white and can be used on a table or wall mounted. It features a mini-XLR output
connector and it's supplied with an XLR terminated white cable.
Product complies with CE regulations
PRECAUTIONS
ATTENZIONE
Per evitare il rischio di shock elettrico non aprire il
prodotto.
Per prevenire rischi di incendio o di scosse elettriche
non esporre questo apparecchio a pioggia e umidità
•
Before installing this unit please carefully read these instructions, and keep this owner's manual for future reference.
•
WARNING: improper installation could irreparably damage the unit.
•
Be careful that unit operation may not cause damage to people.
•
Place the unit in a location protected from weather and far from water and moisture.
•
Don't place this unit close to heat sources (radiators, spotlights, amplifiers etc.)
•
Avoid any liquid entering inside the unit
No user-serviceable parts inside. Refer servicing to an authorized maintenance centre only.
INSTALLATION
1.
Being careful about mounting direction, insert the mini XLR connector on the rear MIC62 microphone.
2.
IConnect microphone base to an external unit (mixer, amplifier, etc.) using supplied cable. If the external unit microphone input can supply
Phantom power, apply it to this microphone by switching Phantom power on
Note: before connecting the microphone to the external unit, it must be turned off and with its volume settings at minimum.
OPERATING SUGGESTIONS
•
If the microphone is placed too close to speaker, it could generate feedback (Larsen effect). Avoid placing the microphone too close to the
speaker, and avoid orienting its capsule toward the speaker. IF, despite these practises, you hear feedback, please lower speaker volume.
•
Due to the microphone's very high sensitivity, be careful the microphone isn't dropped and avoid shock, as it could be damaged.
•
In order to maintain sensitivity and performance, avoid exposing the microphone to moisture or high temperatures.
TECHICAL SPECIFICATION
POLAR PATTERN
Proel SpA maintains a policy of constant research and development, therefore we reserve the right to apply improvements to existing equipment
without prior notice.
Model
Element
Polar Pattern
Frequency response
Sensibility
Output impedance
Max Imput SPL
S/N ratio
Operate Voltage
Cable length
Weight (Kg)
Dimension
Color
MIC62W
Back Electred Condenser
Uni-direzionale
60Hz-16kHz
-48dB±3dB (0dB=1V/Pa @ 1kHz)
600Ω
105 dB (at 1KHz<1% T.H.D.)
67 dB (1KHz@ 1Pa)
9V-48V DC
10 m
0,25 without cable
75 x 100 x 20 mm
White
REV.01 09/13
3
Advertisement
