Qantum 1107 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

21 Healey Road • Dandenong,3175 • Victoria, Australia • ACN# 088 609 661 • www.quantumrehab.com

Table of Contents

Summary of Contents for Qantum 1107

Page 1 21 Healey Road • Dandenong,3175 • Victoria, Australia • ACN# 088 609 661 • www.quantumrehab.com...
Page 2 Performing a prohibited action can cause injury to personnel and/ or damage to equipment (black symbol with red circle and red slash). 088 609 661 Copyright © 2005 This product is manufactured by: Pride Mobility Products Corporation 182 Susquehanna Avenue Exeter, PA 18643 INFMANU2992/Rev A/June05 www.quantumrehab.com Quantum 1107...
Page 3: Table Of Contents
This owner’s manual is compiled from the latest specifications and product information available at the time of publication. We reserve the right to make changes as they become necessary. Any changes to our products may cause slight variations between the illustrations and explanations in this manual and the product you have purchased. Quantum 1107 www.quantumrehab.com...
Page 4: Introduction
Name:_____________________________________________________________________________________ Address:___________________________________________________________________________________ Phone Number:______________________________________________________________________________ Purchase Date:_______________________________________________________________________________ NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact us and we will be glad to send you a new one immediately. www.quantumrehab.com Quantum 1107...
Page 5 Place unit on level ground and stand behind or to one side when changing from drive mode to freewheel mode or freewheel mode to drive mode. Unlocked and in freewheel mode. Battery Configuration: T = Terminal Post Connect Red wire to T with + Connect Black wire to T with – Quantum 1107 www.quantumrehab.com...
Page 6 3-pronged adapter to an electrical outlet having 2-pronged plug access. Failure to heed could result in personal injury and/or property damage. Prevent personal injury and equipment damage. Do not connect an extension lead to the AC/DC converter or the battery charger. www.quantumrehab.com Quantum 1107...
Page 7: Safety
Check all controller connections to the power base. Make sure they are secured properly. n Check the brakes. See VIII. “Care and Maintenance.” n Check battery charge. See VI. “Batteries and Charging.” NOTE: If you discover a problem, contact your Quantum Rehab Specialist for assistance. Quantum 1107 www.quantumrehab.com...
Page 8: Weight Limitations
WARNING! When on any sort of an incline or decline, never place the power chair in freewheel mode while seated on it or standing next to it. Doing so may result in personal injury and/or damage to your power chair. WARNING! Never travel down an incline rearward. This may result in personal injury. www.quantumrehab.com Quantum 1107...
Page 9 Reduce your power chair’s speed when driving on uneven terrain and/or soft surfaces. n Avoid tall grass that can entangle the running gear. n Avoid loosely packed gravel and sand. n If you feel unsure about a driving surface, avoid that surface. Quantum 1107 www.quantumrehab.com...
Page 10 Power chairs are not designed to travel up or down stairs or escalators. Always use a lift. WARNING! Never use your power chair to negotiate steps or escalators. You may cause injury to yourself and to others and/or damage your power chair. www.quantumrehab.com Quantum 1107...
Page 11: Positioning Belts
Failure to do so may result in personal injury. Removable Parts WARNING! Do not attempt to lift or move a power chair by any of its removable parts. Personal injury and/or damage to the power chair may result. Quantum 1107 www.quantumrehab.com...
Page 12: Your Power Chair
Movements such as these may change your centre of gravity and the weight distribution of the power chair. This may cause your power chair to tip, possibly resulting in personal injury. Keep your hands away from the tyres when driving. www.quantumrehab.com Quantum 1107...
Page 13 NOTE: For further information on EMI/RFI, visit the Resource Centre on www.pridemobility.com. If unintended motion or brake release occurs, turn your power chair off as soon as it is safe to do so. Contact your Quantum Rehab Specialist to report the incident. Quantum 1107 www.quantumrehab.com...
Page 14 See figure 5, 6 and 7. SEATBACK ARMRESTS SEAT ASSEMBLY CONTROLLER CABLE CONTROLLER SEAT BASE POWER BASE FOOT RIGGING (FOOT ASSEMBLY PLATFORM SHOWN) CASTER WHEEL DRIVE WHEEL ANTI-TIP WHEELS Figure 5. The Quantum 1107 www.quantumrehab.com Quantum 1107...
Page 15 I I I . Y O U R P O W E R C H A I R QUANTUM 1107 SPECIFICATIONS Class of Use: Suspension: Active-Trac Drive Wheels: 25.4 cm pneumatic (solid tyres are optional) Castor Wheels: 15.25 cm solid, rear-mounted...
Page 16 MANUAL FREEWHEEL LEVER MOTOR/BRAKE ASSEMBLY Figure 6. The Quantum 1107 Power Base Electrical Components The electrical components consist of the controller assembly, the batteries, and the motors. The batteries, motors, and controller power module (if equipped) are located on the power base assembly. See figures 6 and 7. The controller is located on the seat assembly.
Page 17 Controller Power Module: The controller power module enables the controller to communicate with the batteries and the motors. Motor Connectors: This is where the motors connect to the controller power module. CONTROLLER CABLE CONNECTOR BATTERY HARNESS CONNECTOR MOTOR CONNECTOR MOTOR CONNECTOR Figure 7. Quantum 1107 Electrical Components Quantum 1107 www.quantumrehab.com...
Page 18 C H A I R Manual Freewheel Levers The Quantum 1107 has a manual freewheel lever on each motor. See figure 6. Manual freewheel levers enable you to disengage the drive motors from the gearboxes and maneuver the chair manually.
Page 19: Initial Assembly
SEAT INSTALLATION ARMREST ANGLE ADJUSTMENT CONTROLLER POSITION SEAT HEIGHT/ANGLE ADJUSTMENT TYRE/TUBE REPLACEMENT FOOT PLATFORM HEIGHT/ ANTI-TIP WHEEL DEPTH ADJUSTMENT HEIGHT ADJUSTMENT Figure 10. Quantum 1107 Assembly View Quantum 1107 www.quantumrehab.com...
Page 20: Seat Installation
2. Squeeze the seat latch together. 3. Pull the front of the seat up. 4. Slide the seat forward and off of the power base. FLIP UP TO UNLATCH FLIP DOWN TO LATCH Figure 13. Seat Latch Safety www.quantumrehab.com Quantum 1107...
Page 21: Assembly/Disassembly
A S S E M B L Y / D I S A S S E M B L Y Power Base Disassembly The Quantum 1107 power base disassembles into six parts for easy transportation and storage. See figure 13. To disassemble the Quantum 1107: 1.
Page 22 A S S E M B L Y / D I S A S S E M B L Y BATTERY BOX LATCH BATTERY BOX LATCH CENTRE SECTION LATCH (UNLOCKED) (LOCKED) Figure 15. Quantum 1107 Battery Box Removal and Frame Separation www.quantumrehab.com Quantum 1107...
Page 23: Comfort Adjustments
(front or rear). 7. Reinstall the retaining clips. 8. Remove each screw from the side frame handles and front seat interface and apply thread lock. 9. Reinstall each screw and tighten. Figure 17. Side Frame Handles Height Adjustment Quantum 1107 www.quantumrehab.com...
Page 24: Seat Position
1. Locate the armrest knob on each side of the armrest Figure 19. Seatback Angle Adjustment receiver bracket. See figure 19. 2. Loosen each knob. 3. Slide the armrests in or out to the desired width. 4. Tighten each knob. www.quantumrehab.com Quantum 1107...
Page 25: Armrest Angle Adjustment
2. Turn the nut clockwise until it is snug. 3. Rotate the lever until it is in the fully closed position. NOTE: If the lever will not rotate to the fully closed position, then turn the nut anticlockwise one-quarter or one-half turn. Quantum 1107 www.quantumrehab.com...
Page 26: Controller Position
1. Remove the two adjustment screws from the side of each footrest extension. See figure 24. 2. Slide the footrest up or down to the desired length. 3. Reinstall the two adjustment screws. Figure 24. Swing-Away Footrests www.quantumrehab.com Quantum 1107...
Page 27 PROHIBITED! Do not remove the anti-tip wheels. NOTE: Each drive tyre must be inflated to 2.4 bar (35 psi) if equipped with pneumatic tyres. The user must also be seated in the power chair in order to properly adjust the anti-tip wheels. Quantum 1107 www.quantumrehab.com...
Page 28 2. Tilt the foot plate to desired position. 3. Tighten the hardware. To change foot plate angle (D): 1. Turn the setscrew clockwise to decrease the angle. 2. Turn the setscrew anticlockwise to increase the angle. SETSCREW Figure 27. Multi-Axis Foot Plate (ELR Shown) www.quantumrehab.com Quantum 1107...
Page 29: Positioning Belt
See figure 28. 2. Pull the excess strap attached to the metal tab until it is secure, but not so tight as to cause discomfort. Quantum 1107 www.quantumrehab.com...
Page 30: Batteries And Charging
See figure 29. WARNING! When charging through the battery boxes, never use greater than a 5-amp charging system. Failure to comply may result in damage to your power chair. Figure 29. Battery Boxes (Removed from Power Base) www.quantumrehab.com Quantum 1107...
Page 31 If you use your power chair infrequently (once a week or less), you should charge the batteries at least once per week for 12 to 14 hours. NOTE: Keep your batteries fully charged and avoid deeply discharging your batteries. Do not charge the batteries for more than 24 hours at a charging cycle. Quantum 1107 www.quantumrehab.com...
Page 32 Avoid temperature extremes, such as freezing and excessively hot conditions and never attempt to charge a frozen battery. A cold or frozen battery should be warmed for several days prior to recharging. www.quantumrehab.com Quantum 1107...
Page 33 What about shipping? If you wish to use a freight company to ship your power chair to your final destination, repack your power chair in the original shipping container and ship the batteries in separate boxes. Quantum 1107 www.quantumrehab.com...
Page 34: Operation
WARNING! If your power chair begins to move in an unexpected manner, immediately release the joystick. Unless the joystick is damaged, this action should stop your power chair. Keypad The keypad is located in front of the joystick. It contains keys necessary to operate your power chair. See figure 31. www.quantumrehab.com Quantum 1107...
Page 35 If your power chair was programmed with a drive profile, contact your Quantum Rehab Specialist for more information. NOTE: We recommend that the first few times you operate your power chair, you use the lowest speed setting until you become familiar with your new power chair. Quantum 1107 www.quantumrehab.com...
Page 36 The actuator connector connects the VSI to optional powered systems such as elevating leg rests. Controller Connector The controller connector connects the VSI to the power chair’s batteries, motors, and motor brakes. WARNING! Failure to properly align the connectors can result in damage to the VSI, the charger, and the connectors. www.quantumrehab.com Quantum 1107...
Page 37 The parking brakes have a bad connection. Check the parking brake and motor connections. Make sure the controller connections are secure. An excessive voltage has been applied to the controller. This is usually caused by a poor battery connection. Check the battery connections. Quantum 1107 www.quantumrehab.com...
Page 38 WARNING! Unless faced with an emergency situation, do not use the on/off key to stop the chair. This will cause the power chair to stop abruptly. WARNING! Always turn the power off when you are stationary to prevent unexpected movement. www.quantumrehab.com Quantum 1107...
Page 39 “ripple up and down of lights,” turn off the controller and allow the joystick to return to the neutral position. Then turn on the controller. NOTE: If you still get “ripple up and down of lights,” contact your Quantum Rehab Specialist. Quantum 1107 www.quantumrehab.com...
Page 40 For every degree above 122° F, the voltage is reduced by 5 volts. This reduces your power chair’s speed and allows the electrical components to cool down. When the temperature returns to a safe level, your power chair resumes its normal speed. www.quantumrehab.com Quantum 1107...
Page 41 Unplug charger. Check connections. Right Motor Wiring Fault Check right motor wiring. Right Motor Disconnected Check right motor wiring. Left Motor Wiring Fault Check left motor wiring. Left Motor Disconnected Check left motor wiring. Low Battery Voltage Check batteries/battery wiring. Quantum 1107 www.quantumrehab.com...
Page 42 Keypad The keypad is located in front of the joystick. It contains Figure 34. FLIGHT Controller keys necessary to operate your power chair. See figure 35. On/Off Key The on/off key turns the FLIGHT on and off. www.quantumrehab.com Quantum 1107...
Page 43 1. While the FLIGHT is locked, press the on/off key to turn on the FLIGHT. All LEDs will flash briefly. The LEDs will then slowly ripple from right to left. 2. Press the Horn Key twice before the LED ripple has completed, approximately 10 seconds. The FLIGHT is now unlocked. Horn Key The horn key activates the horn. Quantum 1107 www.quantumrehab.com...
Page 44: Error Codes
Check the communications connections and wiring. FLIGHT Power Module Fault Check the communications connections and wiring. FLIGHT Communications Fault Check the communications connections and wiring. Unknown Fault Contact your Quantum Rehab Specialist. Incompatible Controller Fault Contact your Quantum Rehab Specialist. www.quantumrehab.com Quantum 1107...
Page 45: Care And Maintenance
Use a rubber conditioner on the tyre sidewalls to help preserve them. WARNING! Never use a rubber conditioner on the tread area of the tyres; doing so may make the tyres slippery and cause your power chair to skid. Quantum 1107 www.quantumrehab.com...
Page 46: Daily Checks
Keep your power chair clean and free of foreign material, such as mud, dirt, hair, food, drink, etc. Yearly Checks Take your power chair to your Quantum Rehab Specialist for yearly maintenance. This helps ensure that your power chair is functioning properly and helps prevent future complications. www.quantumrehab.com Quantum 1107...
Page 47: Cleaning Instructions
8. Install the hardware that fastens the two rim halves together. 9. Slide the wheel back onto the shaft. Make sure that the Figure 36. Quantum 1107 Drive Wheel key is in the axle slot. 10. Reinstall the drive wheel nut onto the axle and tighten.
Page 48: Battery Replacement
Figure 37. Battery Boxes Rehab Specialist for instructions on disposal. Your Quan- tum Rehab Specialist will also have the necessary infor- mation on battery recycling, which is our recommended course of action. Figure 38. Battery Wiring Diagram Label www.quantumrehab.com Quantum 1107...
Page 49: Corrective Maintenance
Disconnect both batteries before load testing and follow the directions that come with the load tester. If either one of the batteries fails the load test, replace both of them. If your power chair still does not power up, contact your Quantum Rehab Specialist. Quantum 1107 www.quantumrehab.com...
Page 50 REPLACEMENT UNITS The availability of replacement units is subject to the discretion of the provider, not the manufacturer. For more information regarding replacement units, contact your Quantum Rehab Specialist. www.quantumrehab.com Quantum 1107...
Page 51 Thank you for making the Quantum 1107 your choice in Quality Control - Quantum 1107 power chairs. We have Quality Control- Model 14 0 0 thoroughly Model #___________________ inspected your Quantum 1107. Serial #___________________ The following check marks indicate that it...