Connect output
Use the supplied 3-in-1 AV cable to connect the AV-OUT jack on the net-TV Box. Then connect the other
end to the 3RCA to 3RCA cable, then to the output of your TV.
Connect to your network
Connect the net-TV Box's ETHERNET port to the corresponding port on your Modem or Router using a
LAN cable. Use a commercially available LAN or Ethernet cable (CAT5 or better withRJ-45 connector). If
the Box is not near a network connection, many retailers have LAN cables in lengths of 50 feet or more.
Connect Power Source
(Remember to place the step at last.)
Connect the supplied power adapter to the port labeled DC5.5V, and plug the power adapter into an
electrical outlet.
When plugged in, the PWR light on the front panel comes on.
23
<<
>>